Synroof Hi-Build (Acrylic Waterproofing)

Description

DESCRIPTION:

SYNROOF HI-BUILD is an elastometric, single pack acrylic  waterproofing compound. Based on special Acrylic Polymers, it is ideal for dry substratewhere it forms a seamless, joint free, water and weather tight elastic membrane.

USES:

Existing Roofs. SYNROOF HI-BUILD is suitable for roofs ranging from asphalt and asbestos cement to terrazzo tiles and concrete. The substrate may be horizontal or inclined. Use as a waterproofing membrane in traditional (warm roof), un-insulated and invertedroof structures.

GENERAL :

BITUMAT SYNROOF HI-BUILD, an elastomeric, premium quality acrylic waterproofing coating, may be applied by brush, roller, squeegee or spray equipment depending on site conditions. To spray, select a nozzle size of at least 0.028 inch; first checking the spray equipment to ensure suitability.

All surfaces to be coated must be clean, dry, free from dust, dirt, oil and other contaminants. Coverage rate varies depending on factors such as type and quality of substrates i.e. surface regularity and application method.

Apply in separate coats, each at a right angle to the one before. Using a different colour for each coat helps ensure consistency of cover.

The final coating thickness to be achieved depends on the requirements of the individual roof. A final dry film thickness between 0.5 and 1.5 mm may be built-up