COMPLETE LIKE NEW Gentex LPPR Low Profile Particulate Respirator Half-MaskPilot, Model P/N LPPR G055-2000-08, with Microphone Strap, Filter Assy, Cable, Manual and Box.Half-Mask Respirator Intended for Ground Aircraft Applications.
Face Cover type: Reusable full face Respirator. 【Ergonomic design】The gas mask nuclear is made of high quality silicone material,with full face impact resistant lens,durable,not easy to scratch,and perfect fit with facial contour.Chemical mask is also equipped with two-fold elastic headband,easy to adjust,designed for tight and comfortable wear.
The 3M Rugged Comfort Half Facepiece Respirator 6502QL in Medium size is a high-quality personal protective equipment designed for industrial use. This respirator features a comfortable half facepiece design, durable construction, and reliable P100 filtration. With a sleek grey color and a compact size of 6 inches in length and 6.5 inches in width, this respirator is ideal for various applications where protection against airborne particles is necessary. Made in the United States by trusted brand 3M, this respirator ensures safety and comfort for users in demanding work environments.
1x 6200 half-face mask. The lightweight design prevents any excessive burden on your face. It contours seamlessly to your facial contours, providing an excellent seal. Equipped with adjustable headbands and a nose clip, it allows for personalized tightening and optimal fit for the wearer.
3M 37082 / 7502 Cool Flow Reusable Half Face Mask Respirator Facepiece, MASK ONLY Size: MEDIUM Advance silicone material for increased comfort and greater durabilityProprietary 3M CoolFlow valve helps makes breathing easierDual-mode head harness adjusts easily for either standard or drop-down modeExhalation valve cover directs exhaled breath and moisture downward to reduce foggingColor coded to indicate size (small, medium or large) for easy identificationThis half facepiece reusable respirator 7500 Series uses advanced silicone material to help provide comfortable and durable respiratory protection. The 3M™ Cool Flow™ Valve helps make breathing easier and can reduces heat and moisture build-up for cool, dry comfort.The 3M Half Facepiece Reusable Respirator 7500 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved 3M cartridges and filters. When properly fitted and used with approved 3M cartridges and filters, this respirator (commonly referred to as a “mask”) helps provide respiratory protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). This respirator uses an advanced silicone material that provides a softer feel on the face. A unique adjustment design helps reduce pressure points on the face for even more comfort. The 3M Cool Flow Valve helps make breathing easier and can offer cooler and drier comfort for the wearer. Head harness may be adjusted to drop down when not in active use (allows respirator to be removed without taking off hard hat). The exhalation valve cover directs exhaled breath and moisture downward while helping protect the valve area from debris while also making for easier cleaning. Recommended applications include abatement, painting, welding, chemical handling, construction, utilities, mining, pharmaceutical, and smelting. NIOSH, a Federal government regulatory agency, has tested and approved the 7500 Series with 3M cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. This half facepiece respirator may be used with 3M Cartridge 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M half Facepiece Reusable Respirator 7500 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.Made from a soft silicone and featuring the 3M™ Cool Flow™ Valve for ultimate comfortBuilt for comfort and convenience Our 3M™ 7500 Series reusable respirators are made from an advanced silicone material to help give your crew comfort throughout their shifts. The adjustable features are designed to help reduce pressure and tension points on the wearer’s face, while the adjustable head cradle provides a secure, personalized fit.When this respirator is not in active use, the drop-down feature allows the respirator to be taken off without having to remove a hard hat. A versatile choice The 3M™ 7500 Series is compatible with a wide variety of NIOSH-approved 3M respirator filters and cartridges to help protect your workforce from certain particulates, gases and vapors. When properly fitted and used with approved 3M cartridges and filters, this respirator may help provide respiratory protection at concentrations up to ten times the OSHA Permissible Exposure Limit (PEL).This half face respirator is also compatible with the 3M™ Versaflo TR-600 and TR-800 Powered Air Purifying Respirators and dual airline supplied air systems.Recommended industriesConstructionFood, Beverage, & AgricultureGeneral ManufacturingHeavy IndustrialMarineMining, Oil & GasPharmaceuticalTransportationPremium comfort and durability
3M 6503 / 49491 Reusable Half Face Mask Respirator Facepiece With 2 Each 3M 2091 / 07000 P100 Particulate Filter Cartridge, Size: MEDIUM 3M 6503 / 49491 : Resilient silicone face seal helps provide comfort, durability, and stability with a soft but firm sealProprietary Cool Flow valve helps reduce heat and moistureExhalation valve cover helps direct exhaled breath and moisture downward to reduce fogging of eyewear and grinding and welding shieldsLow profile half facepiece design offers a wider field of view and better compatibility with welding and grinding shieldsAdjustable head harness assembly offers improved fit and comfortThe 3M™ Rugged Comfort 6500 Series Half Facepiece Reusable Respirator is designed to help promote comfort, durability, and stability with a firm, lightly textured silicone faceseal and strong body construction.The 3M™ Rugged Comfort 6500 Series Half Facepiece Reusable Respirator helps provide respiratory protection in harsh, dirty environments against airborne contaminants when used with approved 3M™ cartridges and filters. This facepiece is designed to help promote comfort, durability, and stability with a firm, lightly textured silicone faceseal and strong body construction. When properly fitted and used with approved 3M™ cartridges and filters, this respirator helps provide respiratory protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). While being the lightest silicone 3M facepiece, it is still rugged enough to withstand long hours and extreme conditions. The resilient silicone faceseal offers an extended facepiece life, even keeping its shape in high-heat environments.The facepiece offers numerous other comfort features. Two innovative design features have been built in: a special valve cover that helps to direct exhaled breath and moisture downward and 3M’s proprietary Cool Flow™ Valve that helps to make breathing easier by reducing heat and moisture. Made to fit securely and comfortably on the head, the facepiece comes with an adjustable head harness assembly featuring long-lasting polyester/spandex straps that stretch and conform to the individual who wears the respirator. This facepiece is compatible with all 3M™ bayonet-style filters and cartridges, including 6000 Series Cartridges and 3M™ 2000, 2200, 7000 or 5000 Series Filters, to help provide respiratory protection against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. This filter compatibility helps to make the respirator highly versatile for many workplace environments and a variety of jobs where respiratory protection is required.A durable, long-lasting respirator, the 6500 Series facepiece is rugged enough to help withstand extreme conditions and long hours, yet comfortable to wear. Premium choice to help protect your workforce from certain airborne contaminantsBuilt comfortable, yet durable The 3M™ Rugged Comfort 6500 Series Half Facepiece Reusable Respirator is designed to help promote comfort, durability, and stability with a firm, lightly textured silicone faceseal and strong body construction.A versatile choice The 3M™ 6500 Series is compatible with a wide variety of 3M respirator cartridges and filters to make a NIOSH-approved respirator and help protect your workforce from certain particulates, gases and vapors. When used with 3M™ respirator filters and cartridges, this respirator may help provide respiratory protection at concentrations up to ten times the OSHA Permissible Exposure Limit (PEL). This half face respirator is also compatible with the 3M™ Versaflo™ TR-600 and TR-800 powered air purifying systems (not approved with Dual Airline supplied air systems).Be proactive The 3M Respirator Selection Guide (3M.com/respiratorselector) may be used to help you select the proper respirators, cartridges, and filters for your work environment. Change your employee’s 3M particulate filters anytime they are dirty, damaged, or difficult to breathe through. For gas/vapor cartridges, use the 3M Service Life software (3M.com/sls) to develop a cartridge changeout schedule.Recommended industriesAgricultureDesign & ConstructionFacility SanitationGeneral ManufacturingHeavy IndustrialIndustrial MaintenanceMarineMetal Production & FabricationMilitaryMaintenanceRepair and Operation (MRO)Mining, Oil & GasPharmaceuticalTransportationRugged comfort, durability, and slim profile design3M 2091 / 07000: Exceptional 99.97% filter efficiency meets NIOSH P100-series test criteriaAdvanced Electret Media (AEM) provides lightweight, easy breathing comfortVersatile protection against many oil and non-oil based particulate contaminantsBayonet compatibility allows use with many 3M™ half and full facepiece designsWide range of applications reduces inventory needs and training requirementsThe 3M Particulate Filter 2091, P100 helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. 3M’s Advanced Electret Media (AEM) provides a comfortable lightweight, easy-breathing combination. The 2091 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. The filter is both flame and water resistant. Industries where this filter is commonly used include agriculture, construction, general manufacturing, pharmaceuticals and primary metals. NIOSH-approved P100 Particulate Filter for respiratory protection against certain oil and non-oil based particulatesVersatile and simple to install The 3M™ Particulate Filters 2000 Series are made with electrostatic media to enhance the capture of airborne particles and reduce breathing resistance. These particulate filters are flame resistant and easy to install. Plus, 3M™ Particulate Filters 2000 Series are compatible with 3M™ 6000 Series Half Facepieces, 6500/6500QL Series, 7500 Series, 6000 Series Full Facepieces, FF-400 Series, 7800 Series and 3M™ Scott™ AV-3000 HT and AV-3000 SureSeal Facepieces with AV-632 Bayonet Adapter, thus helping to reduce inventory needs.Help protect your workforce After you’ve determined the contaminants and exposure levels in your work environment, help protect your employees with a properly fitted 3M™ Reusable Respirator and corresponding particulate filters. 3M™ Particulate Filters 2000 Series are NIOSH-approved and are designed to help filter a broad range of oil and non-oil based airborne particulate contaminants when used with half and full facepieces, and certain 3M™ Scott™ full facepieces. These filters help provide respiratory protection from particulate contaminant concentrations up to 10 times the OSHA Permissible Exposure Limit (PEL) with half facepieces and 50 times the OSHA PEL with quantitatively fit tested full facepieces. Some models include nuisance level organic vapor and/or acid gas relief. Not for use in environments that are immediately dangerous to life or health (IDLH) or contain hazardous levels of organic vapors and/or acid gases (except hydrogen flouride on certain models).Recommended industriesConstructionFood ProcessingIndustrial MaintanenceMarineMining, Oil & GasTransportationPharmaceuticalWide range of applications reduces inventory needs
1 X Mask Respirator. This mask can be used for PAINTING/ SPRAYING/ Anti-dust/ Anti-Smoke/ Anti-Chemical dust etc. Food grade silicone：this mask make you feel soft, elastic, difficult to deform. 4）Inspiratory grid：It has small suction resistance and can prevent rain and splash.
3M 6300 / 07026 Half Face Mask Reusable Respirator Facepiece Size: LARGEWith 1 Pair Of 3M 60924 Ammonia Methylamine P100 Cartridge Filter 3M 6300 / 07026: This series combines comfort and convenienceComfortable soft, lightweight facepiece with easy-to-adjust head strapsNIOSH approved for negative pressure air purifying and supplied air dual airline applicationsCan be disassembled, cleaned and reusedReplaceable cartridges and filters allow reuse of facepiece for cost savingsThis half facepiece reusable respirator offers reliable and convenient respiratory protection and is suitable for many situations, helping provide protection against particulates and a wide variety of gases and vapors according to NIOSH approvals.The 3M Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M cartridges and filters, this respirator helps provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time. NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series Half Facepiece with 3M cartridges, filters or supplied air systems. The 6000 Series is NIOSH approved for negative-pressure air purifying and positive-pressure dual airline applications. This half facepiece respirator may be used with 3M Cartridge 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ Half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants.Made from lightweight materialsBuilt for comfort and convenience Our 3M™ 6000 Series reusable respirators are made from lightweight materials, and the adjustable features help provide a secure fit. The ergonomic placement of 3M™ filters and cartridges helps improve balance and visibility. A versatile choice The 6000 series is compatible with a wide variety of NIOSH-approved 3M respirator cartridges and filters to help protect your workforce from certain particulates, gases and vapors. When used with 3M™ respirator filters and cartridges, this respirator may help provide respiratory protection at concentrations up to ten times the OSHA Permissible Exposure Limit (PEL). This half face respirator is also compatible with the 3M™ TR-600 and TR-800 powered air purifying (PAPR) systems and Dual Airline supplied air systems.Recommended industriesAutomotiveConstructionFood & Beverage ManufacturingGeneral ManufacturingHeavy ManufacturingIndustrial MaintenanceMarineMiningPharmaceuticalsOil & GasTransportationLightweight, economical reusable respirator facepiece 3M 60924: Combined ammonia methylamine cartridge with P100 particulate filterSwept-back design for enhanced field of view and balanceUse with 3M™ Reusable RespiratorsWide range of applications reduces inventory needsSimple installation and usage requirements reduce training needsThis cartridge is NIOSH approved to help provide respiratory protection against ammonia, methylamine and particulates. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series.This ammonia/methylamine cartridge/P100 filter can be used for a variety of applications, including agriculture, chemical manufacturing, laboratories and the food industry. Swept-back design offers enhanced comfort and visibility.When properly fitted, helps provide respiratory protection from ammonia, methylamine as well as non-oil and oil particulates at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepiecesFull facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure modeNot for use in environments that are immediately dangerous to life or health (IDLH)NIOSH-approved for respiratory protection against certain gases or vaporsVersatile, ergonomic, and simple to installDesigned to enhance field of view and comfort on the job, these gas/vapor cartridges feature a low-profile, swept-back design. The 3M™ Gas/Vapor Cartridges are easy to install. Plus, these cartridges are compatible with 3M™ 6000 Series Half Facepieces, 6500/6500QL Series, 7500 Series, 6000 Series Full Facepieces, FF-400 Series, 7800 Series, 3M™ Scott™ AV- 3000 HT and AV-3000 SureSeal Facepieces with AV-632 Bayonet Adapter, thus helping to reduce inventory needs.Easy breathing 3M™ Gas/Vapor Cartridges are designed to balance breathability and long service life. Gas and vapor cartridges use carbon particles to adsorb contaminants, filtering the air that you breathe. 3M™ has designed our cartridges to be easy to breathe through and long lasting by optimizing the layers and depth of the carbon bed, geometry of the cartridge body, and carbon particle size. Help protect your workforceAfter you’ve determined the contaminants and exposure levels in your work environment, help protect your employees with a properly fitted 3M™ Reusable Respirator and corresponding cartridges. 3M™ Gas/Vapor Cartridges are NIOSH-approved and help provide respiratory protection from certain gas or vapor concentrations up to 10 times the OSHA Permissible Exposure Limit (PEL) with half facepieces and 50 times the OSHA PEL with quantitatively fit tested full facepieces. Not for use in environments that are immediately dangerous to lifeor health (IDLH) or contain hazardous levels of airborne particulates.Recommended industriesFood ProcessingDesign & ConstructionFacility SanitationGeneral ManufacturingHeavy IndustrialIndustrial MaintenanceMarineMining, Oil & GasMetal Production & FabricationTransportation
3M 07026 Half Face Mask Reusable Respirator Facepiece Respiratory Protection 6300 MASK ONLY, Size LARGE*** Cartridges & Filters Sold Separately *** This series combines comfort and convenienceComfortable soft, lightweight facepiece with easy-to-adjust head strapsNIOSH approved for negative pressure air purifying and supplied air dual airline applicationsCan be disassembled, cleaned and reusedReplaceable cartridges and filters allow reuse of facepiece for cost savingsThis half facepiece reusable respirator offers reliable and convenient respiratory protection and is suitable for many situations, helping provide protection against particulates and a wide variety of gases and vapors according to NIOSH approvals.The 3M Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M cartridges and filters, this respirator helps provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time. NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series Half Facepiece with 3M cartridges, filters or supplied air systems. The 6000 Series is NIOSH approved for negative-pressure air purifying and positive-pressure dual airline applications. This half facepiece respirator may be used with 3M Cartridge 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ Half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants.
The NEW 6200 Half Facepiece Respirator Mask is a medium-sized, gray mask designed for industrial use. With a half mask design and vapor filter cartridges, this respirator mask offers protection for the face and respiratory system. The 6200 model, made in China, includes 20 cartridges for continuous use. Perfect for personal protective equipment in various industrial settings, this respirator mask ensures safety and comfort for users. Thanks for looking!