Replaces John Deere OEM Number(s) MIA10144. Compatible with John Deere Tractor(s) 3320, 3520, 3720.
If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping2-year Warranty Made in EuropeSnow Plow Cylinder 1.5″ Bore 10″ Stroke Snowplow replacement on Fisher Brand NEW Hydraulic Cylinder WSP 1.5x10F&D Welded Single Acting Hydraulic Cylinder Bore: 1.5″ ID Stroke: 10″ Rod: 1.5″ Retracted: 17.25″ Extended: 27.25″ Overall Length: 18.75″ Pin Size: 1″ Port Size: 1/4 – 18″ NPT Work Pressure: 2500 PSI Color: Black Replacement: Fisher & Diamond Single-action heavy-duty hydraulic cylinder is suitable for a variety of mobile snow plow equipment. Honed tubing, hard chrome plated rod and top-quality seals allow Magister Hydraulics snow plow cylinders to work in extreme conditions. This cylinder is a replacement for Fisher & Diamond brand. PaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. Standard shipping via FedEx Ground. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either replacement or a full refund. BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). Customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. High QualityTariff-FreeFast ShippingSee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Hydraulic Cylinder WSP 1.5x10F&D Welded Single Acting Hydraulic Cylinder Bore: 1.5″ ID Stroke: 10″ Rod: 1.5″ Retracted: 17.25″ Extended: 27.25″ Overall Length: 18.75″ Pin Size: 1″ Port Size: 1/4 – 18″ NPT Work Pressure: 2500 PSI Color: Black Replacement: Fisher & Diamond Single-action heavy-duty hydraulic cylinder is suitable for a variety of mobile snow plow equipment. Honed tubing, hard chrome plated rod and top-quality seals allow Magister Hydraulics snow plow cylinders to work in extreme conditions. This cylinder is a replacement for Fisher & Diamond brand. If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping2-year Warranty Made in EuropeSnow Plow Cylinder 1.5″ Bore 10″ Stroke Snowplow replacement on Fisher Brand NEW Hydraulic Cylinder WSP 1.5x10F&D Welded Single Acting Hydraulic Cylinder Bore: 1.5″ ID Stroke: 10″ Rod: 1.5″ Retracted: 17.25″ Extended: 27.25″ Overall Length: 18.75″ Pin Size: 1″ Port Size: 1/4 – 18″ NPT Work Pressure: 2500 PSI Color: Black Replacement: Fisher & Diamond Single-action heavy-duty hydraulic cylinder is suitable for a variety of mobile snow plow equipment. Honed tubing, hard chrome plated rod and top-quality seals allow Magister Hydraulics snow plow cylinders to work in extreme conditions. This cylinder is a replacement for Fisher & Diamond brand. Payment We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. Shipping We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. Standard shipping via FedEx Ground. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either replacement or a full refund.Returns BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). Customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. Tariff-FreeFast ShippingHigh QualitySee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Hydraulic Cylinder WSP 1.5x10F&D Welded Single Acting Hydraulic Cylinder Bore: 1.5″ ID Stroke: 10″ Rod: 1.5″ Retracted: 17.25″ Extended: 27.25″ Overall Length: 18.75″ Pin Size: 1″ Port Size: 1/4 – 18″ NPT Work Pressure: 2500 PSI Color: Black Replacement: Fisher & Diamond Single-action heavy-duty hydraulic cylinder is suitable for a variety of mobile snow plow equipment. Honed tubing, hard chrome plated rod and top-quality seals allow Magister Hydraulics snow plow cylinders to work in extreme conditions. This cylinder is a replacement for Fisher & Diamond brand.
If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping2-year Warranty Made in EuropeSnow Plow Cylinder 1.5″ Bore 8″ Stroke Snowplow replacement on Western Brand NEW Hydraulic Cylinder WSP 1.5x8WES Welded Single Acting Hydraulic Cylinder Bore: 1.5″ ID Stroke: 8″ Rod: 1.5″ Retracted: 15.25″ Extended: 23.25″ Overall Length: 16.5″ Pin Size: 3/4″ Port Size: 1/4 – 18″ NPT Work Pressure: 2500 PSI Color: Black Replacement: Western Single-action heavy-duty hydraulic cylinder is suitable for a variety of mobile snow plow equipment. Honed tubing, hard chrome plated rod, and top-quality seals allow Magister Hydraulics snow plow cylinders to work in extreme conditions. This cylinder is a replacement for Western brand cylinders. PaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. Standard shipping via FedEx Ground. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either replacement or a full refund. BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). Customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. High QualityTariff-FreeFast ShippingSee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Hydraulic Cylinder WSP 1.5x8WES Welded Single Acting Hydraulic Cylinder Bore: 1.5″ ID Stroke: 8″ Rod: 1.5″ Retracted: 15.25″ Extended: 23.25″ Overall Length: 16.5″ Pin Size: 3/4″ Port Size: 1/4 – 18″ NPT Work Pressure: 2500 PSI Color: Black Replacement: Western Single-action heavy-duty hydraulic cylinder is suitable for a variety of mobile snow plow equipment. Honed tubing, hard chrome plated rod, and top-quality seals allow Magister Hydraulics snow plow cylinders to work in extreme conditions. This cylinder is a replacement for Western brand cylinders. If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping2-year Warranty Made in EuropeSnow Plow Cylinder 1.5″ Bore 8″ Stroke Snowplow replacement on Western Brand NEW Hydraulic Cylinder WSP 1.5x8WES Welded Single Acting Hydraulic Cylinder Bore: 1.5″ ID Stroke: 8″ Rod: 1.5″ Retracted: 15.25″ Extended: 23.25″ Overall Length: 16.5″ Pin Size: 3/4″ Port Size: 1/4 – 18″ NPT Work Pressure: 2500 PSI Color: Black Replacement: Western Single-action heavy-duty hydraulic cylinder is suitable for a variety of mobile snow plow equipment. Honed tubing, hard chrome plated rod, and top-quality seals allow Magister Hydraulics snow plow cylinders to work in extreme conditions. This cylinder is a replacement for Western brand cylinders. Payment We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. Shipping We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. Standard shipping via FedEx Ground. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either replacement or a full refund.Returns BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). Customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. Tariff-FreeFast ShippingHigh QualitySee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Hydraulic Cylinder WSP 1.5x8WES Welded Single Acting Hydraulic Cylinder Bore: 1.5″ ID Stroke: 8″ Rod: 1.5″ Retracted: 15.25″ Extended: 23.25″ Overall Length: 16.5″ Pin Size: 3/4″ Port Size: 1/4 – 18″ NPT Work Pressure: 2500 PSI Color: Black Replacement: Western Single-action heavy-duty hydraulic cylinder is suitable for a variety of mobile snow plow equipment. Honed tubing, hard chrome plated rod, and top-quality seals allow Magister Hydraulics snow plow cylinders to work in extreme conditions. This cylinder is a replacement for Western brand cylinders.
Including 1 x Hydraulic Toplink (Painted Black Color), 2 x Hoses, 2 x Male Couplers with dust cover, 2 x Banjo Bolts, 4 x Washers,Hose Length : 29,5″ . The male quick couplers are 1/2″ BSP Poppet Style .The piston rod can be rotated as needed. Holder to hold the unit when it is un-used.This top link is equipped with a locking block. With this valve, the oil is enclosed in the cylinder by a check valveHydraulic Toplink operates at up to 3500 PSI. Push Force : 5100 Lbs , Pull force : 3100 Lbs at 2600 PSI.Recommended Tractor Power : 10-40 HP Description: The hydraulic top link we offer replaces the existing top link on the tractor and makes your daily work easier. A double-acting control valve on the tractor is necessary for this – an unbeatable combination in combination with the integrated locking block .When adjusting the hydraulic toplink, it is very important that the adjusted position is maintained even after a long period of time. This is hardly possible with top links without a locking block, as the tractor’s control units do not lock so tightly. This top link is therefore equipped with a locking block. With this valve, the oil is enclosed in the cylinder by a check valve. Only when there is oil pressure from the tractor again does the valve open and the cylinder can be adjusted. The hydraulic top link is made of high-quality steel and features a high-strength steel piston, threaded gland with wear ring, polished chrome plated rod, and welded steel base ends. It is designed to withstand heavy applications and extreme weather conditions. The piston and rod seals ensure excellent sealing performance, preventing oil evaporation, air leakage, and piston blockage.
This hydraulic cylinder has been lost during shipping purchased at auction due to rough shipping and handling. It does have scratches and paint chips throughout, but still in good condition not been used being sold at a discounted price for those reasons..,
Replaces John Deere OEM Number(s) T22914. Compatible with John Deere Backhoe Loader(s) 300, 301, 301A, 302, 400, 401, 401B, 401C. Compatible with John Deere Combine(s) 2240. Compatible with John Deere Construction & Industrial(s) 300, 301, 301A, 302, 400, 401, 401B, 401C.
Right Hand Hydraulic Bucket Cylinder for Takeuchi TL12V2. Fits Takeuchi TL12V2 models precisely. High-quality hydraulic cylinder for smooth operation.
If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping2-year Warranty Made in EuropeHydraulic Cylinder Welded Double Acting 5″ Bore 24″ For Log Splitter 5×24 NEW Log Splitter Double-Acting Hydraulic Cylinder WLS 5×24 Bore: 5″ Stroke: 24″ Rod: 2″ Extended: 58.5″ Retracted: 34.5″ Pin: 1- 1/8″(base) & 9/16″ (rod) Port Size: 1/2″ NPT Pressure: 3500 PSI Replacement for TSC Husky, SplitMaster, Oregon, SpeeCo, and many others Painted black PaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. Standard shipping via FedEx Ground. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either replacement or a full refund. BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). Customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. High QualityTariff-FreeFast ShippingSee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Log Splitter Double-Acting Hydraulic Cylinder WLS 5×24 —Bore: 5″ —Stroke: 24″ —Rod: 2″ —Extended: 58.5″ —Retracted: 34.5″ —Pin: 1- 1/8″(base) & 9/16″ (rod) —Port Size: 1/2″ NPT —Pressure: 3500 PSI —Replacement for TSC Husky, SplitMaster, Oregon, SpeeCo, and many others —Painted black If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping2-year Warranty Made in EuropeHydraulic Cylinder Welded Double Acting 5″ Bore 24″ For Log Splitter 5×24 NEW Log Splitter Double-Acting Hydraulic Cylinder WLS 5×24 Bore: 5″ Stroke: 24″ Rod: 2″ Extended: 58.5″ Retracted: 34.5″ Pin: 1- 1/8″(base) & 9/16″ (rod) Port Size: 1/2″ NPT Pressure: 3500 PSI Replacement for TSC Husky, SplitMaster, Oregon, SpeeCo, and many others Painted black Payment We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. Shipping We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. Standard shipping via FedEx Ground. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either replacement or a full refund.Returns BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). Customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. Tariff-FreeFast ShippingHigh QualitySee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Log Splitter Double-Acting Hydraulic Cylinder WLS 5×24 Bore: 5″ Stroke: 24″ Rod: 2″ Extended: 58.5″ Retracted: 34.5″ Pin: 1- 1/8″(base) & 9/16″ (rod) Port Size: 1/2″ NPT Pressure: 3500 PSI Replacement for TSC Husky, SplitMaster, Oregon, SpeeCo, and many others Painted black
SANDVIK 55004120 Hydraulic Tilt Cylinder. Made in Bulgaria. NEW. We have 2 item available. Sold as pictured.
Replaces John Deere OEM Number(s) RE10924. Compatible with John Deere Tractor(s) 1020, 1520, 1640 (s/n 430000-later), 2020, 2030, 2040 (s/n 430000-later), 2040 (s/n 349999-earlier), 2040 (s/n 350000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2150, 2155, 2240 (s/n 349999-earlier), 2240 (s/n 350000-later), 2255, 2350, 2355N, 2440 (s/n 340999-earlier), 2440 (s/n 341000-later), 2520, 2550, 2630, 2640 (s/n 340999-earlier), 2640 (s/n 341000-later), 2750, 2840, 2855N.