SELLING AS NEW OTHER —– ITEM IS NOT IN FACTORY PACKAGE/BOX —– 01/17/PNB.
RP60A-2500 Parker Gresen Relieve Valve Compatible, 60A/ 2500 PSI set Pilot-operated Cartridge Relief Valve 60GPM/5000PSI, Pre-set 2500PSI Adjustable 500~5000PSI MPF Model # Parker Gresen Part # Spec PRVC60-A-2500 RP60A-2500 60GPM/5000PSI, Pre-set 2500PSI Adjustable range 500~5000PSI PRVC60-A-3000 RP60A-3000 60GPM/5000PSI, Pre-set 3000PSI Adjustable range 500~5000PSI Application: Replace cartridge of Parker’s and Gresen’s inline pilot-operated relief valve RPL series, RPL16-A, RPL75-A, RPL100-A etc and for Gresen valve 25P, V40, V42 Inlets MRV. RPL series RPL16-A, RPL75-A RPL100-A, RPL12-A Main relief for Inlet of 25P, V40, V42 Features & Specifications (details on attached datasheet) Max operation pressure: 350Bar (5000PSI) Flow: 225LPM (60GPM). See Pressure vs. Flow graph on attached datasheet Crack pressure setting: 2500PSI @ 1GPM Screw adjustable: 35~350Bar (500~5000PSI), total turns 5 Adjust 1/4 turn: 13.75Bar (200PSI) ±10% Temperature: -40°F to 201°F (-40°C to 93°C) Fluid: Mineral-based fluids. Filter: ISO Code16/13，SAE Class4 Body material: Steel, pressure up to 350Bar Seal: Burn N Adjustment Nut torque: 12NM Assembly HEX Torque: 53ft.lbs (70Nm) Installation Note: Apply lube oil to seals & torque up to 53ft.lbs (70Nm). Don’t over torque. Pressure should be set according to the OEM’s specifications. Exceeding the specifications could cause a failure in the hydraulic system or with the mechanical structure of the equipment. These failures could cause serious personal injury or death. Terms and General Information:1. Brand name and TrademarkAll parts listed on Amtech store are generic or Canny Hydraulic Inc brand. Use of other manufacturers’ name, part number and trademarks are for cross reference informational purposes only. Which may help shoppers quickly find the products they are looking for. If parts marked as “OEM MFG Parts” means the parts made by manufacturers qualified by OEMs in USA and supply products to these OEMs. 2. ShippingIf item listed by free shipping or flat rate shipping, it is for the lower 48 states in USA only. For Alaska/Hawaii, US Protectorates (Guam, Puerto Rico, Virgin Islands etc.), APO/FPO and International shipping, please contact us for extra shipping cost. Shipping is standard economic chosen by seller. For express shipping required, put note with your order (is not leave message on eBay message). The shipping department will contact you for the extra shipping fee after the order is received.Order processing time is listed as 3~4 days. But normally shipping in 1~2 business days. 3. Shipping Cost and Local Pick up Any $ paid by buyer, including shipping fee and Tax, eBay will charge xx%. If the buyer likes to pick up local. It is good to save $. If buyers like to use their own shipping label or own shipping account (UPS account only) to do shipping, buyer just purchases as local pick up. For some items, the seller still charges a little fee for local pick up by warehouse handling. 4. PaymentPlease note all your payment or refund is through eBay. Tax is collected by eBay. If there is any tax issue, please contact eBay. 5. WarrantyWe sell what we know. 12-month warranty from delivery date. Invoice or packing list must be required for warranty. We will ship replacement items or replacement parts at our discretion. Any warranty value is limited to the buyer who paid for the item. 6. ReturnIf you are not 100% sure the item 100% fits your application, please do not buy. Just contact us and our engineer will be happy to help. we might list some items as not return acceptable. For return acceptable items, if buyer bought wrong and return because not fit or change idea, 25% of item list price will be charged as restock fee. If you buy our item, automatically you agree to the restock fee policy. If a buyer cancels an order before the item is shipped, there is not any fee charged by the seller. 7. Damaged Item or Wrong Item Received If receive a damaged or defective item or lost parts package, please contact the seller in 3 business days. Please take pictures at all sides of package, and pictures at damaged item to show seller. Please keep the package all material because carrier inspector will do inspection. Contact UsBased on eBay policy, we only can contact each other by phone or email after you bought and paid. If buyer has any question about order, please put note on order “contact me before shipping” we will hold order to call buyer. Buyer can cancel order if any concern without any fee before shipping. Thank you for looking
& Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
& Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
New in opened bag. Bag was opened to obtain part number.ROW15-B-TOP. We do not accept responsibility for the correct application or installation of this item. This item should be installed and maintained by qualified individuals.
BIMBA FT-041-3 / FT0413. Double-acting non-rotating dual/twin piston rod pneumatic compact cylinder – IMI Bimba (Flat-II Non-Rotating series) – 3/4″ bore (B3/4″) – 1″ stroke (S1″) – Threaded mounting holes (both ends) – #6-32 UNC (female) threaded rod – #10-32 threaded pneumatic port – Stainless steel 303 rod / Stainless steel 304 body / Buna-N seals.
New – SMC CDQ2WA40TF-10DCZ Compact Cylinder Double Acting Double Rod 40mm Bore 10mm Stroke 16 mm Rod
New Enerpac WR5 Hydraulic Spreader
If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping2-year Warranty Made in EuropeHydraulic Cylinder Welded Double Acting 2.5″ Bore 26″ Stroke Tang WTG 2.5×26 NEW Hydraulic cylinder WTG 2.5×26 Bore: 2.5″ Stroke: 26″ OD: 2.87″ Rod: 1.5″ Retracted: 35″ Extended: 61″ Overall length: 34.7″ Pin hole size: 1″ Port size: SAE 8 Column Load: 12,250 Lbs Max Operating Pressure: 3500 PSI Color: Black PaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. Standard shipping via FedEx Ground. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either replacement or a full refund. BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). Customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. High QualityTariff-FreeFast ShippingSee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Hydraulic cylinder WTG 2.5×26 —Bore: 2.5″ —Stroke: 26″ —OD: 2.87″ —Rod: 1.5″ —Retracted: 35″ —Extended: 61″ —Overall length: 34.7″ —Pin hole size: 1″ —Port size: SAE 8 —Column Load: 12,250 Lbs —Max Operating Pressure: 3500 PSI —Color: Black If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping2-year Warranty Made in EuropeHydraulic Cylinder Welded Double Acting 2.5″ Bore 26″ Stroke Tang WTG 2.5×26 NEW Hydraulic cylinder WTG 2.5×26 Bore: 2.5″ Stroke: 26″ OD: 2.87″ Rod: 1.5″ Retracted: 35″ Extended: 61″ Overall length: 34.7″ Pin hole size: 1″ Port size: SAE 8 Column Load: 12,250 Lbs Max Operating Pressure: 3500 PSI Color: Black Payment We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. Shipping We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. Standard shipping via FedEx Ground. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either replacement or a full refund.Returns BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). Customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. Tariff-FreeFast ShippingHigh QualitySee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Hydraulic cylinder WTG 2.5×26 Bore: 2.5″ Stroke: 26″ OD: 2.87″ Rod: 1.5″ Retracted: 35″ Extended: 61″ Overall length: 34.7″ Pin hole size: 1″ Port size: SAE 8 Column Load: 12,250 Lbs Max Operating Pressure: 3500 PSI Color: Black
If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping2-year Warranty Made in EuropeHydraulic Cylinder Welded Double Acting 2.5″ Bore 16″ Stroke Tang WTG 2.5×16 NEW Hydraulic cylinder WTG 2.5×16 Bore: 2.5″ Stroke: 16″ OD: 2.87″ Rod: 1.5″ Retracted: 25″ Extended: 41″ Overall length: 26.7″ Pin hole size: 1″ Port size: SAE 8 Column Load: 14,700 Lbs Max Operating Pressure: 3500 PSI Color: Black PaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. Standard shipping via FedEx Ground. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either replacement or a full refund. BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). Customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. High QualityTariff-FreeFast ShippingSee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Hydraulic cylinder WTG 2.5×16 —Bore: 2.5″ —Stroke: 16″ —OD: 2.87″ —Rod: 1.5″ —Retracted: 25″ —Extended: 41″ —Overall length: 26.7″ —Pin hole size: 1″ —Port size: SAE 8 —Column Load: 14,700 Lbs —Max Operating Pressure: 3500 PSI —Color: Black If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping2-year Warranty Made in EuropeHydraulic Cylinder Welded Double Acting 2.5″ Bore 16″ Stroke Tang WTG 2.5×16 NEW Hydraulic cylinder WTG 2.5×16 Bore: 2.5″ Stroke: 16″ OD: 2.87″ Rod: 1.5″ Retracted: 25″ Extended: 41″ Overall length: 26.7″ Pin hole size: 1″ Port size: SAE 8 Column Load: 14,700 Lbs Max Operating Pressure: 3500 PSI Color: Black Payment We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. Shipping We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. Standard shipping via FedEx Ground. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either replacement or a full refund.Returns BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). Customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. Tariff-FreeFast ShippingHigh QualitySee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Hydraulic cylinder WTG 2.5×16 Bore: 2.5″ Stroke: 16″ OD: 2.87″ Rod: 1.5″ Retracted: 25″ Extended: 41″ Overall length: 26.7″ Pin hole size: 1″ Port size: SAE 8 Column Load: 14,700 Lbs Max Operating Pressure: 3500 PSI Color: Black