Portwest High Vis Frisco Contrast Vest, US381 Reflective Safety Vest Portwest Hi-Vis Reflective Safety Vest, US381Colors: Yellow, Orange (Contrast/Dual Colors)Sizes: M-5XL. The fabric is lightweight, comfortable and highly breathable.
Heavy duty black bottom and trim to help keep a clean appearance. Zipper front closure reinforced with durable webbing. 2” wide high performance reflective material laminated to 3” contrasting color.
Whether you’re out for a jog after sunset, cycling through the park, or working on-site, visibility is key to your safety. Built with 5 spacious pockets for convenient storage, this vest caters to all your daily needs while prioritizing maximum comfort.
Track Page Views With Auctiva’s FREE Counter
Train the EZ, realistic SM Smith Co. way. No tape, no smoke, no prep times. Train anywhere, anytime. Allows instructors to closely watch evolution’s without fighting to see through smoke. Allows training in facilities that otherwise could not be used, such as hospitals, schools,etc. Simple to use, slip the cover on the mask, adjust the bungi if necessary, don regulator and train…in seconds! Sometimes on the AV2000 the bungi needs to be snugged pretty tight to stay on because of the shape of the mask. S.M. Smith Co. BO2-100 SCBA Blackout Cover. (Mask NOT included.) Will not fit AV3000 or any other masks. the AV2000 is a slightly older style mask, sometimes called a 2.2 or used with the 4.5 tank. We have the AV3000 available in another listing. We also have B/Os for most other masks.Email for info.100% heavy duty polyester fleece custom milled for us. Washable, breathable, dissipates any moisture.Heavy duty bungi cord to adjust fit.Also available in red in larger qty.We have sold thousands of these throughout the country for over 20 years.We have many other mask bags also, and Blackout Covers for training, goggle protectors, shield protectors, goggle bags, etc. Please google SM Smith Co.and then call us.We have been making mask bags and blackout covers since 1992. I was employed in the City of Iron Mountain Fire Dept, MI and found the plastic bags that came with our new masks did not protect them. So I started my bag business.Our bags and blackouts have been copied by all, but never equaled in quality. See our ad in Fire Engineering.Any questions or departmental orders please call us.Made in Michigan. USA.
Train the EZ, realistic SM Smith Co. way. No tape, no smoke, no prep times. Train anywhere, anytime. Allows instructors to closely watch evolution’s without fighting to see through smoke. Allows training in facilities that otherwise could not be used, such as hospitals, schools,etc. Simple to use, slip the cover on the mask, adjust the bungi if necessary, don regulator and train…in seconds! Sometimes on the AV2000 the bungi needs to be snugged pretty tight to stay on because of the shape of the mask. S.M. Smith Co. BO2-100 SCBA Blackout Cover. (Mask NOT included.) Will not fit AV3000 or any other masks. the AV2000 is a slightly older style mask, sometimes called a 2.2 or used with the 4.5 tank. We have the AV3000 available in another listing. We also have B/Os for most other masks.Email for info.100% heavy duty polyester fleece custom milled for us. Washable, breathable, dissipates any moisture.Heavy duty bungi cord to adjust fit.Also available in red in larger qty.We have sold thousands of these throughout the country for over 20 years.We have many other mask bags also, and Blackout Covers for training, goggle protectors, shield protectors, goggle bags, etc. Please google SM Smith Co.and then call us.We have been making mask bags and blackout covers since 1992. I was employed in the City of Iron Mountain Fire Dept, MI and found the plastic bags that came with our new masks did not protect them. So I started my bag business.Our bags and blackouts have been copied by all, but never equaled in quality. See our ad in Fire Engineering.Any questions or departmental orders please call us.Made in Michigan. USA.
Train the EZ, realistic SM Smith Co. way. No tape, no smoke, no prep times. Train anywhere, anytime. Allows instructors to closely watch evolution’s without fighting to see through smoke. Allows training in facilities that otherwise could not be used, such as hospitals, schools,etc. Simple to use, slip the cover on the mask, adjust the bungi if necessary, don regulator and train…in seconds! Sometimes on the AV2000 the bungi needs to be snugged pretty tight to stay on because of the shape of the mask. S.M. Smith Co. BO2-100 SCBA Blackout Cover. (Mask NOT included.) Will not fit AV3000 or any other masks. the AV2000 is a slightly older style mask, sometimes called a 2.2 or used with the 4.5 tank. We have the AV3000 available in another listing. We also have B/Os for most other masks.Email for info.100% heavy duty polyester fleece custom milled for us. Washable, breathable, dissipates any moisture.Heavy duty bungi cord to adjust fit.Also available in red in larger qty.We have sold thousands of these throughout the country for over 20 years.We have many other mask bags also, and Blackout Covers for training, goggle protectors, shield protectors, goggle bags, etc. Please google SM Smith Co.and then call us.We have been making mask bags and blackout covers since 1992. I was employed in the City of Iron Mountain Fire Dept, MI and found the plastic bags that came with our new masks did not protect them. So I started my bag business.Our bags and blackouts have been copied by all, but never equaled in quality. See our ad in Fire Engineering.Any questions or departmental orders please call us.Made in Michigan. USA.
Set of TEN! 2.5″ x 4″ rectangle hat patch sublimation blank with black stitching all around are a great way to add some fun to any hat or jacket. Ours have glue paper on the back side which heats up for you to attach to your hat or garment. Nifty! Our rectangle hat patches are sublimation ready! Sublimation Instructions:Temperature: 400 degrees for 45 seconds Print your artwork about 1/2″ larger than your patch. Don’t forget to reverse!LINT ROLL YOUR PATCH! REPEAT! LINT ROLL YOUR PATCH!You sublimate on the flat finish side of the patch! The shiny side is the glue.Place your patch with the shiny glue side down (and flat side facing up) on a piece of parchment wax paper so that when the glue warms up it will easily be removed from the shiny side of your wax paper.Place your artwork on top of your patch facing downwards. Use heat tape to tape your patch down onto your artwork. (Do not use adhesive spray).Cover everything with butcher blow-out paperHeat at 400 for 45 secondsUse heat gloves to remove your artwork immediately, but leave your parchment wax paper on the back of your patch on. Let it cool for 5 or 10 minutes so your glue sets up again.To attach your patch to your hat or garment, remove the wax paper from behind. Place on your hat and use a hat press at 300 degrees for 30-35 seconds. You can also use an iron at its hottest setting with no steam, too. But be sure to cover your patch with paper first. Additionally, you can stitch/sew your patch on as well.
Set of TEN! 2.5″ x 4″ rectangle hat patch sublimation blank with black stitching all around are a great way to add some fun to any hat or jacket. Ours have glue paper on the back side which heats up for you to attach to your hat or garment. Nifty! Our rectangle hat patches are sublimation ready! Sublimation Instructions:Temperature: 400 degrees for 45 seconds Print your artwork about 1/2″ larger than your patch. Don’t forget to reverse!LINT ROLL YOUR PATCH! REPEAT! LINT ROLL YOUR PATCH!You sublimate on the flat finish side of the patch! The shiny side is the glue.Place your patch with the shiny glue side down (and flat side facing up) on a piece of parchment wax paper so that when the glue warms up it will easily be removed from the shiny side of your wax paper.Place your artwork on top of your patch facing downwards. Use heat tape to tape your patch down onto your artwork. (Do not use adhesive spray).Cover everything with butcher blow-out paperHeat at 400 for 45 secondsUse heat gloves to remove your artwork immediately, but leave your parchment wax paper on the back of your patch on. Let it cool for 5 or 10 minutes so your glue sets up again.To attach your patch to your hat or garment, remove the wax paper from behind. Place on your hat and use a hat press at 300 degrees for 30-35 seconds. You can also use an iron at its hottest setting with no steam, too. But be sure to cover your patch with paper first. Additionally, you can stitch/sew your patch on as well.
Set of TEN! 2.5″ x 4″ rectangle hat patch sublimation blank with black stitching all around are a great way to add some fun to any hat or jacket. Ours have glue paper on the back side which heats up for you to attach to your hat or garment. Nifty! Our rectangle hat patches are sublimation ready! Sublimation Instructions:Temperature: 400 degrees for 45 seconds Print your artwork about 1/2″ larger than your patch. Don’t forget to reverse!LINT ROLL YOUR PATCH! REPEAT! LINT ROLL YOUR PATCH!You sublimate on the flat finish side of the patch! The shiny side is the glue.Place your patch with the shiny glue side down (and flat side facing up) on a piece of parchment wax paper so that when the glue warms up it will easily be removed from the shiny side of your wax paper.Place your artwork on top of your patch facing downwards. Use heat tape to tape your patch down onto your artwork. (Do not use adhesive spray).Cover everything with butcher blow-out paperHeat at 400 for 45 secondsUse heat gloves to remove your artwork immediately, but leave your parchment wax paper on the back of your patch on. Let it cool for 5 or 10 minutes so your glue sets up again.To attach your patch to your hat or garment, remove the wax paper from behind. Place on your hat and use a hat press at 300 degrees for 30-35 seconds. You can also use an iron at its hottest setting with no steam, too. But be sure to cover your patch with paper first. Additionally, you can stitch/sew your patch on as well.