This is a 4-layer, 5-in-1 multi-functional floor-standing screen printing tool and material combination rack. First install and lock the base wheels. Item Number:5-in-1 Multi-functional Combination Rack (4 Layers)–010528.
This cold mounting machine is widely used in wedding dress, art photography, as well as rare paintings, important charts and advertising pictures. 29.5in/ 75cm Cold Mounting Machine. When cleaning the rubber roll, use a soft cloth dipped in alcohol to wipe it.
This is a machine in which a shaft with blades rotates in a cylinder or tank to stir and mix various ingredients into a mixture or suitable consistency. Drum Mixing Speed: 28 RPM. 3mm thickened barrel wall, thickened blade, more durable.
Test Adhesion Friction Test Abraser. Ink Printing Decolorization Tester Machine. This product is used to test ink adhesion and judge ink quality. Friction load: 4.5LBS/2.04kg/20N. 4 kinds of speed adjustable.
Small feed granulator, also known as small household feed granulator, is based on the principle of circular motion. The main shaft and flat mold drive the pressure roller to rotate under the action of friction.
When using, it should be noted that there should be no foreign matter such as stones and iron blocks in the raw materials. After the pellet machine has been working continuously for more than ten shifts, the pressure roller oil hole, the universal joint oil hole, and the linkage shaft oil hole need to be filled with high-temperature lubricating grease to make the pressure roller have good working performance and extended bearing life.
Acrylic Heat Bending Machine Attention 1. Machine should be placed in dry, clean, ventilated position, the operation of the machine placed in a horizontal position and smooth. Keep away from flammables and explosives. 2.For safety reasons, must be connected to a reliable safety grounding device must have three feet with ground connection. 3. The heating process leads to high temperature, so avoid contacting the heating area with fingers or skin. 4. Unplug the power cable/cord, if the machine will not be used in a long time. Description The acrylic bending machine heater is the core part of bending machine. You can assemble various kinds of ideal practical acrylic bender with this heater. 1.Processing Material: Acrylic, Plastic, PVC, Plexiglass. 2.Used for: This acrylic bending machine heater can be widely used in decoration engineering, sign making, display cabinet, aquarium wrapping, lighting LED channel letter, bending the supermarket shelves, curtain wall, large light box, acrylic plates and plastic plates. 3.The acrylic bending machine heater can bend all kinds of plastic sheet. If the thickness of acrylic sheet is beyond 6mm, you can use two heaters heat the top and bottom of the sheet at the same time, or you need to cut a slot on the sheet. 4.You can also use many acrylic bender heaters to heat more bents at the same time. Parameter Voltage: 110V Frequency: 50/60Hz Power: 2000W Other model selection: 300W/800W/1500W Maximum heating Width: 70.87in(1800mm) Other model selection: 11.81in(300mm)/23.62in(600mm)/48.03in(1220mm) Heating Thickness: within0.24″ (6mm) Package Type Cardboard Box Note:There is no battery in the thermometer, which needs to be prepared by the customer. Please note that the cooling water temperature should not exceed 40 ℃. Feature & Advantage 1.Reasonable design, small size, compact structure and beautiful appearance. 2.Heat even and temperature adjustable. 3.With circulating cooling water system on both sides of heating pipe. 4.Power supply joint and water pipe joint are at the same end. 5.The body is made of special aluminum extrusions. 6.Portable, small occupation, low consumption and reliable operation. 7.Light and practical with low cost, value-priced. 8.Circulating cooling water system can make sure other parts (no heating is required) won’t get thermal deformation. 9.Free plugging and unplugging, easy to storage and assembles to worktable very conveniently. Recommended temperature for some regular materials: Acrylic: 210℃ Perspex: 195℃ PVC sheet: 155℃ ABS: 190℃ PET: 160℃ NOTE: Just for reference, and users may modify them according to their materials and working habits. Item Number:022307 Shipping & Handling ▲ Default shipping cost or free shipping service is only for the lower 48 United States by UPS Ground or USPS. Other areas or needs other shipping ways, please contact us. ▲ 6 months’ warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost. Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays. Sales tax / Customs duties: Collected by ebay. Return / Refund Returns & Exchanges ▲ All returns should be made within 30 days of delivery date. Items must be in unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition. ▲ Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15-30% restocking fee of the items purchase price will be charged. Defective & Damaged Products ▲ If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding. On Oct 17, 2024 at 02:35:06 PDT, seller added the following information:
新建网页 3 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 1 Automatic Optical Optometry Ophthalmic Eyeglass Test Stand Combined Table 110V This table use advanced technology, good looking and operating characteristic, safe and reliable. The maximum loading ability is about 75kg. Easy to move, low noise, lifting up and down smoothly. Parameters: Large table size: 35.4*20 inch （90*51cm） Drawer size：21.2*15*2.3 inch （54*38*6cm） Lifting stroke of large table: 5.9 inch（15cm） Height of large table above ground：27.5*33.5 inch（70-85cm） Small table size:16.1*12.2 inch （41*31cm） Small table sliding stroke: 15inch （38cm） Load: 165Lbs （75KG） Voltage: 110V Power: 120W Feature 1. Equipped with bull eye bracket, can hang bull eye. Equipped with lighting, easy to operate. 2. Large capacity drawer for storing data items. 3. One-button operation switch for easy control. 4. The large table can be raised and lowered by a key. 5. The small table can be moved left and right. 6. Square steel pipe base, stable lifting, load 75kg. Item Number(239799): 1*Full Automatic Optometry Ophthalmic Eyeglass Test Stand Combined Table 110V Shipping & Handling Details Default Shipping Cost or Free Shipping Information: ▲ Default shipping cost or free shipping service is only for the customers from Canada or the lower 48 United States by Canada Post, USPS or the UPS Ground. Customers from other areas or needs other shipping ways, please contact us. ▲ Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there will be extra shipping costs, please contact us for more detailed information. ▲ Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer. Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays. Sales tax / Customs duties: Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer. Damage In Shipping: Email or call us First! We will work with you to get the case resolved in the fastest method. Return / Refund If you are not 100% happy with your purchase, please contact Us. Please don’t directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding. Returns & Exchanges ▲ All returns must be made within 14 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition. ▲ Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged. ▲ Returns that are the result of our seller’s error: Buyer will receive a full refund of the item as well as shipping charges ▲ All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details. Defective & Damaged Products ▲ If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding. ▲ Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method. ▲ If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above. Warranty & Feedback ▲ 6 months’ warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost. ▲ Any warranty shipping cost to us is responsible by buyer. ▲ Any shipping cost to buyer is responsible by the seller. ▲ We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive feedback as it’s very important for us. Thanks very much. 新建网页 1
When using, it should be noted that there should be no foreign matter such as stones and ironblocks in the raw materials. After the pellet machine has been working continuously for morethan ten shifts, the pressure roller oil hole, the universal joint oil hole, and the linkage shaft oilhole need to be filled with high-temperature lubricating grease to make the pressure roller Goodworking performance and extended bearing life.
This machine is equipped with a kneading blade, which can perform kneading operation after the material is cut, making the material more crushed. After crushing, it can reach 5-15MM. This machine is also equipped with a set of kneading blades, which first cut and knead the silk, and operate more finely.