E6010 3/32″ 5Ibs Stick Welding Electrode 6010 Welding Rods 2 Packs
E6010 is an all position, cellulosic electrode that has a quick-starting, steady, and deep penetrating arc. It produces x-ray quality welds in flat, horizontal, overhead, vertical-up, and vertical-down positions. E6010 was developed for the pipe welding industry and is recommended for welding API grades A25, A, B, and X42 pipe and general structural fabrication. Typical Applications • General-purpose fabrication • Maintenance welding • Out-of-position X-ray welds • Construction and shipbuilding • Pipe welding • Vertical and overhead plate welding AWS Specification AWS A5.1/A5.1M:2004 AWS Classification E6010 Welding Current DCEP All orders ship within 1 business day. Orders are shipped using USPS, UPS ground is used in some cases. Physical addresses are preferred. We will accept your return or exchange within 30 days of the original purchase. Returned items must have original packaging and must be unused and undamaged All items come with a manufacturer warranty. The warranty applies to defective products. Damage inflicted By the user is not covered. All taxes and Duties for international shipments are the buyer responsibility. Trade Marks and OEM’s: We respect other companies’ brands and trademarks. Weldingpartners in no way, affiliated with any brands, trademarks and manufacturers in this site. All named brands, trademarks and manufacturers are purely for customers’ convenience. Your satisfaction is our priority
E6010 is an all position, cellulosic electrode that has a quick-starting, steady, and deep penetrating arc. It produces x-ray quality welds in flat, horizontal, overhead, vertical-up, and vertical-down positions. E6010 was developed for the pipe welding industry and is recommended for welding API grades A25, A, B, and X42 pipe and general structural fabrication. Typical Applications • General-purpose fabrication • Maintenance welding • Out-of-position X-ray welds • Construction and shipbuilding • Pipe welding • Vertical and overhead plate welding AWS Specification AWS A5.1/A5.1M:2004 AWS Classification E6010 Welding Current DCEP All orders ship within 1 business day. Orders are shipped using USPS, UPS ground is used in some cases. Physical addresses are preferred. We will accept your return or exchange within 30 days of the original purchase. Returned items must have original packaging and must be unused and undamaged All items come with a manufacturer warranty. The warranty applies to defective products. Damage inflicted By the user is not covered. All taxes and Duties for international shipments are the buyer responsibility. Trade Marks and OEM’s: We respect other companies’ brands and trademarks. Weldingpartners in no way, affiliated with any brands, trademarks and manufacturers in this site. All named brands, trademarks and manufacturers are purely for customers’ convenience. Your satisfaction is our priority
Looks to be very lightly used and still pretty much full.
Up for sale are Analog Devices temp sensors P/N: AD7417ARUZ. This Buy It Now is for 1 temp sensor. Here are some specs: Digital Temperature Sensor -40°C to 125°C 2.7V – 5.5V Supply Surface Mount 16-TSSOP D/C: 1218Manufacturer data sheet is available here: Data SheetThese are New Old Stock though they are no longer in the original manufacturer packaging. Inquire for quantity pricing. We’ll be happy to answer any additional questions.WarrantyAll components are sold as-is and without warranty. Please see Terms for our return policy. For mission critical applications, components should be tested at an accredited test house to verify condition and authenticity. Please contact us for details regarding testing.Terms Returns are accepted for 30 days. If for any reason you’d like to return the item, simply pay return shipping for a full refund on the purchase price. The item must be in the same condition it was sent in. If there was any factory packaging, it must remain unopened. Return shipping fees may be refunded on a case-by-case basis. Payment Payment is due in 10 days.Shipping Standard Shipping: $4.65 Expedited Shipping: $8.95 Next Day Shipping: $26.20 Each Additional 1 piece(s): $0.00The above listed rates are valid anywhere in the United States. We combine shipping. If you’re purchasing multiple items from our store and are having trouble getting shipping to combine, request an invoice and we can combine it manually. We can ship via UPS, FedEx, or DHL on your account number. Local pickup is also available.International Buyers Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. Thanks for looking! Powered by SixBit’s eCommerce Solution
E6022 1/8″ 10Ibs Stick Welding Electrode Vacuum Packed E6022 are recommended for single-pass, high-speed, high current welding of groove welds in the flat welding position, lap joints in the horizontal welding position, and fillet welds on sheet metal. The weld face tends to be more convex and less uniform, especially since the welding speeds are higher. It is designed for welding roof decking to support beans and applications where burn-through spot welds are required. May also be used on poor or hard to clean steels such as painted, greasy and galvanized/ plated steels and square edge butt joints.TYPICAL WELDING PROCEDURES; DCEN & ACDiameter Amps (Flat) Volt 1/8” 110-150 23-27 Electrode Size: 1/8″ Electrode Length: 14″ Net WT: 10 Ibs SPECIFICATIONS: ANSI/AWS A5.1 & ASME SFA 5.1 E6022All orders ship within 1 business day. Orders are shipped using USPS, UPS ground is used in some cases. Physical addresses are preferred. We ship to the PayPal Verified address that is sent to us at the time of checkout. Please verify the address is correct before making payment. We will accept your return or exchange within 30 days of the original purchase. A restocking fee of 15% may be charged on returns. Buyer pays for return shipping. Returns and undeliverable items will have the original cost of outgoing shipping charges deducted from the refund issued. Returned items must have original packaging and must be unused and undamaged, buyer pays for return shipping. UPS shipments returned as undeliverable or refused will have both the original and return shipping fees deducted from their refund. All items come with a manufacturer warranty. The warranty applies to defective products. Damage inflicted By the user is not covered. All taxes and Duties for international shipments are the buyer responsibility. Privacy Polices: Weldingpartners will keep all customer information private at all time. We will NOT sell any customers information to any third party. Trade Marks and OEM’s: We respect other companies’ brands and trademarks. Weldingpartners in no way, affiliated with any brands, trademarks and manufacturers in this site. All named brands, trademarks and manufacturers are purely for customers’ convenience. Disclaimer: Weldingpartners is in no way responsible for any damages incurred from inadequate training or mis use of the products we sell. Please refer to all instructions and warnings provided by qualified personnel and/or official safety institution such as American Welding Society (AWS). WARNING: Certain welding products may contain chromium and/or nickel which are listed by OSHA, NTP or IARC as being carcinogens or potential carcinogens. Use of these products may expose you or others to fumes and gases at levels exceeding those established by the American Conference of Governmental Industrial Hygienists (ACGIH) or the Occupational Safety and Health Administration (OSHA). Before use, read and understand the Material Safety Data Sheet (MSDS) for these and all WeldingPartners Products. Your satisfaction is our priority
Stick electrodes 6010 3/32″ 10Ibs 1 Pack Welding Rods vacuum seal packages6010 is a high cellulose coated electrode designed to provide a smooth stable arc forceful enough to achieve deep penetration into the base metal. This electrode exhibits high deposition efficiency and low spatter loss. It produces a weld puddle that wets and spreads well, yet sets up fast enough to make this electrode ideal for vertical up or vertical down welding techniques. 6010 electrodes produce a flat weld bead with coarse ripples and a thin easily removable slag. 6010 electrodes may be used in the flat, horizontal, vertical or overhead welding positions. · All orders ship within 1 business day. Orders are shipped using USPS, UPS ground is used in some cases. Physical addresses are preferred.· We ship to the Paypal Verified address that is sent to us at the time of checkout. Please verify that the address is correct before making payment.· We accept your return or exchange within 30 days of the original purchase. A restocking fee of 15% will be charged on returns. Buyer pays for return shipping.· Returns and undeliverable items will have the cost of shipping deducted from the refund issued.· Returned items must have original packaging and must be unused and undamaged, buyer pays for return shipping. UPS shipments returned as undeliverable or refused will have both the original and return shipping fees deducted from their refund.· All items come with a manufacturer warranty. The warranty applies to defective products. Damage inflicted by the user is not covered.· All taxes and Duties for international shipments are the buyer responsibility.Your satisfaction is our priority Normal 0 false false false EN-US X-NONE X-NONE
This electrode exhibits high deposition efficiency and low spatter loss. It produces a weld puddle that wets and spreads well, yet sets up fast enough to make this electrode ideal for vertical up or vertical down welding techniques.
Stick electrodes 7018 1/8″ 10Ibs 1 Pack Welding Rods vacuum seal packageDESCRIPTION: 7018 is the most efficient general purpose, iron powder-low hydrogen electrode used for welding carbon steels, free-machining steels and low alloy steels with a minimum yield strength of 50,000 psi. 7018 has a very good deposition rate, providing a quiet steady arc with low spatter and medium penetration. Weld deposits are of X-ray quality with easy slag removal, exceptional mechanical properties and a smooth uniform bead appearance. 7018 has excellent operator appeal and may be used in any position with AC or DC (reverse polarity). low alloy steel shere the welds are subject to X-ray inspection. SPECIFICATIONS: ANSI/AWS A5.1 & ASME SFA 5.1 E7018 · All orders ship within 1 business day. Orders are shipped using USPS, UPS ground is used in some cases. Physical addresses are preferred.· We ship to the Paypal Verified address that is sent to us at the time of checkout. Please verify that the address is correct before making payment.· We accept your return or exchange within 30 days of the original purchase. A restocking fee of 15% will be charged on returns. Buyer pays for return shipping.· Returns and undeliverable items will have the cost of shipping deducted from the refund issued.· Returned items must have original packaging and must be unused and undamaged, buyer pays for return shipping. UPS shipments returned as undeliverable or refused will have both the original and return shipping fees deducted from their refund.· All items come with a manufacturer warranty. The warranty applies to defective products. Damage inflicted by the user is not covered.· All taxes and Duties for international shipments are the buyer responsibility.Your satisfaction is our priority Normal 0 false false false EN-US X-NONE X-NONE
Stick electrodes 6010 5/32″ 10Ibs 1 Pack Welding Rods vacuum seal packages6010 is a high cellulose coated electrode designed to provide a smooth stable arc forceful enough to achieve deep penetration into the base metal. This electrode exhibits high deposition efficiency and low spatter loss. It produces a weld puddle that wets and spreads well, yet sets up fast enough to make this electrode ideal for vertical up or vertical down welding techniques. 6010 electrodes produce a flat weld bead with coarse ripples and a thin easily removable slag. 6010 electrodes may be used in the flat, horizontal, vertical or overhead welding positions. · All orders ship within 1 business day. Orders are shipped using USPS, UPS ground is used in some cases. Physical addresses are preferred.· We ship to the Paypal Verified address that is sent to us at the time of checkout. Please verify that the address is correct before making payment.· We accept your return or exchange within 30 days of the original purchase. A restocking fee of 15% will be charged on returns. Buyer pays for return shipping.· Returns and undeliverable items will have the cost of shipping deducted from the refund issued.· Returned items must have original packaging and must be unused and undamaged, buyer pays for return shipping. UPS shipments returned as undeliverable or refused will have both the original and return shipping fees deducted from their refund.· All items come with a manufacturer warranty. The warranty applies to defective products. Damage inflicted by the user is not covered.· All taxes and Duties for international shipments are the buyer responsibility.Your satisfaction is our priority