If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping1-year Warranty Made in Europe Hydraulic Gear Pump 2-11 GPM 9 Tooth Spline Shaft SAE A-2 Bolts CCW Cast Iron Displacement – 0.76 Cubic Inches Shaft Type - 9 Tooth Spline Shaft Mounting Flange – SAE A-2 Bolts Outlet Port – SAE 10 Inlet Port – SAE 12 MAX Working Pressure – 3600 PSI Direction – Counter-Clockwise (Left) 2 – 11 GPM GPM @ 2000 RPM – 6.58 MAX Speed – 3500 RPM MIN Speed – 600 RPM Cast Iron Body and Mounting Flange Weight – 6 LBS 1-year Manufacturer Warranty For more details please check the drawing PaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either a replacement or a full refund. BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). The customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, with no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. High QualityTariff-FreeFast ShippingSee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. —Displacement – 0.76 Cubic Inches —Shaft Type – 9 Tooth Spline Shaft —Mounting Flange – SAE A-2 Bolts —Outlet Port – SAE 10 —Inlet Port – SAE 12 —MAX Working Pressure – 3600 PSI —Direction – Counter-Clockwise (Left) —2 – 11 GPM —GPM @ 2000 RPM – 6.58 —MAX Speed – 3500 RPM —MIN Speed – 600 RPM —Cast Iron Body and Mounting Flange —Weight – 6 LBS —1-year Manufacturer Warranty —For more details please check the drawing If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping1-year Warranty Made in Europe Hydraulic Gear Pump 2-11 GPM 9 Tooth Spline Shaft SAE A-2 Bolts CCW Cast Iron Displacement – 0.76 Cubic Inches Shaft Type - 9 Tooth Spline Shaft Mounting Flange – SAE A-2 Bolts Outlet Port – SAE 10 Inlet Port – SAE 12 MAX Working Pressure – 3600 PSI Direction – Counter-Clockwise (Left) 2 – 11 GPM GPM @ 2000 RPM – 6.58 MAX Speed – 3500 RPM MIN Speed – 600 RPM Cast Iron Body and Mounting Flange Weight – 6 LBS 1-year Manufacturer Warranty For more details please check the drawing Payment We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. Shipping We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either a replacement or a full refund.Returns BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). The customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, with no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. Tariff-FreeFast ShippingHigh QualitySee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Displacement – 0.76 Cubic Inches Shaft Type - 9 Tooth Spline Shaft Mounting Flange – SAE A-2 Bolts Outlet Port – SAE 10 Inlet Port – SAE 12 MAX Working Pressure – 3600 PSI Direction – Counter-Clockwise (Left) 2 – 11 GPM GPM @ 2000 RPM – 6.58 MAX Speed – 3500 RPM MIN Speed – 600 RPM Cast Iron Body and Mounting Flange Weight – 6 LBS 1-year Manufacturer Warranty For more details please check the drawing
If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping1-year Warranty Made in Europe Hydraulic Gear Pump 4-18 GPM 9 Tooth Spline Shaft SAE A-2 Bolts CCW Cast Iron Displacement – 1.70 Cubic Inches Shaft Type - 9 Tooth Spline Shaft Mounting Flange – SAE A-2 Bolts Outlet Port – SAE 10 Inlet Port – SAE 12 Peak Pressure – 2300 PSI Direction – Counter-Clockwise (Left) 4 – 18 GPM GPM @ 2000 RPM – 14.71 MAX Speed – 2500 RPM MIN Speed – 500 RPM PaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either a replacement or a full refund. BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). The customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, with no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. High QualityTariff-FreeFast ShippingSee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. —Displacement – 1.70 Cubic Inches —Shaft Type – 9 Tooth Spline Shaft —Mounting Flange – SAE A-2 Bolts —Outlet Port – SAE 10 —Inlet Port – SAE 12 —Peak Pressure – 2300 PSI —Direction – Counter-Clockwise (Left) —4 – 18 GPM —GPM @ 2000 RPM – 14.71 —MAX Speed – 2500 RPM —MIN Speed – 500 RPM If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping1-year Warranty Made in Europe Hydraulic Gear Pump 4-18 GPM 9 Tooth Spline Shaft SAE A-2 Bolts CCW Cast Iron Displacement – 1.70 Cubic Inches Shaft Type - 9 Tooth Spline Shaft Mounting Flange – SAE A-2 Bolts Outlet Port – SAE 10 Inlet Port – SAE 12 Peak Pressure – 2300 PSI Direction – Counter-Clockwise (Left) 4 – 18 GPM GPM @ 2000 RPM – 14.71 MAX Speed – 2500 RPM MIN Speed – 500 RPM Payment We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. Shipping We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either a replacement or a full refund.Returns BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). The customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, with no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. Tariff-FreeFast ShippingHigh QualitySee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Displacement – 1.70 Cubic Inches Shaft Type - 9 Tooth Spline Shaft Mounting Flange – SAE A-2 Bolts Outlet Port – SAE 10 Inlet Port – SAE 12 Peak Pressure – 2300 PSI Direction – Counter-Clockwise (Left) 4 – 18 GPM GPM @ 2000 RPM – 14.71 MAX Speed – 2500 RPM MIN Speed – 500 RPM
1.Product Features: Displacement: 0.97 Cubic Inches Shaft Type: 3/4″ Straight Keyed Mounting Flange: SAE A-2 Bolts Outlet Port: SAE 10 Inlet Port: SAE 12 MAX Working Pressure: 3200 PSI Peak Pressure: 3900 PSI Direction: Counter-Clockwise (Left) 4 – 12 GPM MAX Speed: 3000 RPM MIN Speed: 600 RPM Cast Iron Body and Mounting Flange Weight: 9 LBS Hydraulics are manufactured with a thru-bolt design; the Mounting flange and rear cover are made of cast iron; SAE A-2 mounting flange; This gear pump has high operational and strength specs. The seals installed reduce the fluid’s internal flow and help achieve high volumetric efficiency. 2.Application: .
If you need any technical assistance, do not hesitate to contact us (844) MAGISTE Free Shipping1-year Warranty Made in EuropeHydraulic Gear Pump 1-6 GPM 5/8″ Keyed Shaft SAE A-2 Bolts CW Cast Iron Flange Hydraulic Gear Pump 1-6 GPM 5/8″ Keyed Shaft SAE A-2 Bolts CW Cast Iron NEW Displacement – 0.38 Cubic Inches Shaft Type – 5/8″ Straight Keyed Mounting Flange – SAE A-2 Bolts Outlet Port – SAE 10 Inlet Port – SAE 12 MAX Working Pressure – 3600 PSI Peak Pressure – 4350 PSI Direction – Clockwise (Right) 1 – 6 GPM MAX Speed – 4000 RPM MIN Speed – 700 RPM Cast Iron Body and Mounting Flange Weight – 5 LBS 1-year Manufacturer Warranty For more details please check the drawing PaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. We offer FREE shipping via FedEx Ground on all products! (Some exclusions apply.) Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either a replacement or a full refund. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one. We will refund the amount within 2 business days from receiving the returned item. Restocking fee is 15%. – The customer will be responsible for both outbound shipping and return shipping charges. – The customer may return any unopened (New in Box) merchandise within the specified time for a full refund except a restocking fee of 15%. – Merchandise that has been “Opened” may be returned within the specified time, however the returned items must be in a condition worthy of selling “new” with all original materials and packaging present. Power Equipment Returns are not eligible for returns once it has been in contact with gas or oil. Once gassed or oiled it will not be accepted for return even if sent back. If you have gassed or oiled the machine and are having problems, you will need to take it to an authorized service center. If it is a manufacturer defect it may be covered under warranty through that service dealer. BENT RODS IS NOT A WARRANTY CASE!!!High QualityTariff-FreeFast ShippingSee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Hydraulic Gear Pump 1-6 GPM 5/8″ Keyed Shaft SAE A-2 Bolts CW Cast Iron NEW —Displacement – 0.38 Cubic Inches —Shaft Type – 5/8″ Straight Keyed —Mounting Flange – SAE A-2 Bolts —Outlet Port – SAE 10 —Inlet Port – SAE 12 —MAX Working Pressure – 3600 PSI —Peak Pressure – 4350 PSI —Direction – Clockwise (Right) —1 – 6 GPM —MAX Speed – 4000 RPM —MIN Speed – 700 RPM —Cast Iron Body and Mounting Flange —Weight – 5 LBS —1-year Manufacturer Warranty —For more details please check the drawing If you need any technical assistance, do not hesitate to contact us (844) MAGISTE Free Shipping1-year Warranty Made in EuropeHydraulic Gear Pump 1-6 GPM 5/8″ Keyed Shaft SAE A-2 Bolts CW Cast Iron Flange Hydraulic Gear Pump 1-6 GPM 5/8″ Keyed Shaft SAE A-2 Bolts CW Cast Iron NEW Displacement – 0.38 Cubic Inches Shaft Type – 5/8″ Straight Keyed Mounting Flange – SAE A-2 Bolts Outlet Port – SAE 10 Inlet Port – SAE 12 MAX Working Pressure – 3600 PSI Peak Pressure – 4350 PSI Direction – Clockwise (Right) 1 – 6 GPM MAX Speed – 4000 RPM MIN Speed – 700 RPM Cast Iron Body and Mounting Flange Weight – 5 LBS 1-year Manufacturer Warranty For more details please check the drawing Payment We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. Shipping We offer FREE shipping via FedEx Ground on all products! (Some exclusions apply.) Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either a replacement or a full refund.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one. We will refund the amount within 2 business days from receiving the returned item. Restocking fee is 15%. – The customer will be responsible for both outbound shipping and return shipping charges. – The customer may return any unopened (New in Box) merchandise within the specified time for a full refund except a restocking fee of 15%. – Merchandise that has been “Opened” may be returned within the specified time, however the returned items must be in a condition worthy of selling “new” with all original materials and packaging present. Power Equipment Returns are not eligible for returns once it has been in contact with gas or oil. Once gassed or oiled it will not be accepted for return even if sent back. If you have gassed or oiled the machine and are having problems, you will need to take it to an authorized service center. If it is a manufacturer defect it may be covered under warranty through that service dealer. BENT RODS IS NOT A WARRANTY CASE!!!Tariff-FreeFast ShippingHigh QualitySee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Hydraulic Gear Pump 1-6 GPM 5/8″ Keyed Shaft SAE A-2 Bolts CW Cast Iron NEW Displacement – 0.38 Cubic Inches Shaft Type – 5/8″ Straight Keyed Mounting Flange – SAE A-2 Bolts Outlet Port – SAE 10 Inlet Port – SAE 12 MAX Working Pressure – 3600 PSI Peak Pressure – 4350 PSI Direction – Clockwise (Right) 1 – 6 GPM MAX Speed – 4000 RPM MIN Speed – 700 RPM Cast Iron Body and Mounting Flange Weight – 5 LBS 1-year Manufacturer Warranty For more details please check the drawing
Feature: Hydraulics are manufactured with a thru-bolt design; the Mounting flange and rear cover are made of cast iron; SAE A-2 mounting flange; This gear pump has high operational and strength specs. The seals installed reduce the fluid’s internal flow and help achieve high volumetric efficiency. Hydraulic Gear Pump is suitable for a variety of mobile equipment applications, such as agriculture, construction, transportation, forestry, garden, etc. High performance,reliable quality We work with every effort to provide quality products and professional service. Specification: .
If you need any technical assistance, do not hesitate to contact us (844) MAGISTE Free Shipping2-year Warranty Made in Europe Hydraulic Gear Pump 2-9 GPM 9 Tooth Spline Shaft SAE A-2 Bolts CCW Cast Iron Displacement – 0.61 Cubic Inches Shaft Type - 9 Tooth Spline Shaft Mounting Flange – SAE A-2 Bolts Outlet Port – SAE 10 Inlet Port – SAE 12 MAX Working Pressure – 3600 PSI Direction – Counter-Clockwise (Left) 2 – 9 GPM GPM @ 2000 RPM – 5.28 MAX Speed – 3600 RPM MIN Speed – 700 RPM DescriptionPaymentShippingReturnsDescriptionPaymentShippingReturnsMagister Hydraulics gear pumps are manufactured with a thru-bolt design; Mounting flange and rear cover made of cast iron; SAE A-2 mounting flange; This gear pump has high operational and strength specs. The seals installed, reduce the internal flow of the fluid and help to achieve high volumetric efficiency. For more details please check the drawing; Suitable for a variety of mobile equipment applications, such as agriculture, construction, transportation, forestry, garden, etc. We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. We offer FREE shipping on all our cylinders! Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. Standard shipping via FedEx Ground. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either replacement or a full refund. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one. We will refund the amount within 2 business days from receiving the returned item. Restocking fee is 15%. – The customer will be responsible for both outbound shipping and return shipping charges. – The customer may return any unopened (New in Box) merchandise within the specified time for a full refund except a restocking fee of 15%. – Merchandise that has been “Opened” may be returned within the specified time, however the returned items must be in a condition worthy of selling “new” with all original materials and packaging present. Power Equipment Returns are not eligible for returns once it has been in contact with gas or oil. Once gassed or oiled it will not be accepted for return even if sent back. If you have gassed or oiled the machine and are having problems, you will need to take it to an authorized service center. If it is a manufacturer defect it may be covered under warranty through that service dealer. BENT RODS IS NOT A WARRANTY CASE!!!High QualityTariff-FreeFast ShippingSee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. —Displacement – 0.61 Cubic Inches —Shaft Type – 9 Tooth Spline Shaft —Mounting Flange – SAE A-2 Bolts —Outlet Port – SAE 10 —Inlet Port – SAE 12 —MAX Working Pressure – 3600 PSI —Direction – Counter-Clockwise (Left) —2 – 9 GPM —GPM @ 2000 RPM – 5.28 —MAX Speed – 3600 RPM —MIN Speed – 700 RPM If you need any technical assistance, do not hesitate to contact us (844) MAGISTE Free Shipping2-year Warranty Made in Europe Hydraulic Gear Pump 2-9 GPM 9 Tooth Spline Shaft SAE A-2 Bolts CCW Cast Iron Displacement – 0.61 Cubic Inches Shaft Type - 9 Tooth Spline Shaft Mounting Flange – SAE A-2 Bolts Outlet Port – SAE 10 Inlet Port – SAE 12 MAX Working Pressure – 3600 PSI Direction – Counter-Clockwise (Left) 2 – 9 GPM GPM @ 2000 RPM – 5.28 MAX Speed – 3600 RPM MIN Speed – 700 RPM DescriptionMagister Hydraulics gear pumps are manufactured with a thru-bolt design; Mounting flange and rear cover made of cast iron; SAE A-2 mounting flange; This gear pump has high operational and strength specs. The seals installed, reduce the internal flow of the fluid and help to achieve high volumetric efficiency. For more details please check the drawing; Suitable for a variety of mobile equipment applications, such as agriculture, construction, transportation, forestry, garden, etc.Payment We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. Shipping We offer FREE shipping on all our cylinders! Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. Standard shipping via FedEx Ground. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either replacement or a full refund.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one. We will refund the amount within 2 business days from receiving the returned item. Restocking fee is 15%. – The customer will be responsible for both outbound shipping and return shipping charges. – The customer may return any unopened (New in Box) merchandise within the specified time for a full refund except a restocking fee of 15%. – Merchandise that has been “Opened” may be returned within the specified time, however the returned items must be in a condition worthy of selling “new” with all original materials and packaging present. Power Equipment Returns are not eligible for returns once it has been in contact with gas or oil. Once gassed or oiled it will not be accepted for return even if sent back. If you have gassed or oiled the machine and are having problems, you will need to take it to an authorized service center. If it is a manufacturer defect it may be covered under warranty through that service dealer. BENT RODS IS NOT A WARRANTY CASE!!!Tariff-FreeFast ShippingHigh QualitySee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Displacement – 0.61 Cubic Inches Shaft Type - 9 Tooth Spline Shaft Mounting Flange – SAE A-2 Bolts Outlet Port – SAE 10 Inlet Port – SAE 12 MAX Working Pressure – 3600 PSI Direction – Counter-Clockwise (Left) 2 – 9 GPM GPM @ 2000 RPM – 5.28 MAX Speed – 3600 RPM MIN Speed – 700 RPM
Shaft Type – 9 Tooth Spline Shaft. 3 – 15 GPM. GPM @ 2000 RPM – 10.56. Mounting Flange – SAE A-2 Bolts. Outlet Port – SAE 10. Inlet Port – SAE 12. Motorcycle Radiator. Radiator Hose.
If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping1-year Warranty Made in Europe Hydraulic Gear Pump 3-17 GPM 5/8″ Keyed Shaft SAE A-2 Bolts CW Cast Iron NEW Hydraulic Gear Pump 3-17 GPM 5/8″ Keyed Shaft SAE A-2 Bolts CW Cast Iron NEW Displacement – 1.37 Cubic Inches Shaft Type – 5/8″ Straight Keyed Mounting Flange – SAE A-2 Bolts Outlet Port – SAE 10 Inlet Port – SAE 12 MAX Working Pressure – 2300 PSI Peak Pressure – 2900 PSI Direction – Clockwise (Right) 3 – 17 GPM MAX Speed – 3000 RPM MIN Speed – 500 RPM Cast Iron Body and Mounting Flange Weight – 7 LBS 1-year Manufacturer Warranty For more details please check the drawing PaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either a replacement or a full refund. BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). The customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, with no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. High QualityTariff-FreeFast ShippingSee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Hydraulic Gear Pump 3-17 GPM 5/8″ Keyed Shaft SAE A-2 Bolts CW Cast Iron NEW —Displacement – 1.37 Cubic Inches —Shaft Type – 5/8″ Straight Keyed —Mounting Flange – SAE A-2 Bolts —Outlet Port – SAE 10 —Inlet Port – SAE 12 —MAX Working Pressure – 2300 PSI —Peak Pressure – 2900 PSI —Direction – Clockwise (Right) —3 – 17 GPM —MAX Speed – 3000 RPM —MIN Speed – 500 RPM —Cast Iron Body and Mounting Flange —Weight – 7 LBS —1-year Manufacturer Warranty —For more details please check the drawing If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping1-year Warranty Made in Europe Hydraulic Gear Pump 3-17 GPM 5/8″ Keyed Shaft SAE A-2 Bolts CW Cast Iron NEW Hydraulic Gear Pump 3-17 GPM 5/8″ Keyed Shaft SAE A-2 Bolts CW Cast Iron NEW Displacement – 1.37 Cubic Inches Shaft Type – 5/8″ Straight Keyed Mounting Flange – SAE A-2 Bolts Outlet Port – SAE 10 Inlet Port – SAE 12 MAX Working Pressure – 2300 PSI Peak Pressure – 2900 PSI Direction – Clockwise (Right) 3 – 17 GPM MAX Speed – 3000 RPM MIN Speed – 500 RPM Cast Iron Body and Mounting Flange Weight – 7 LBS 1-year Manufacturer Warranty For more details please check the drawing Payment We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. Shipping We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either a replacement or a full refund.Returns BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). The customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, with no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. Tariff-FreeFast ShippingHigh QualitySee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Hydraulic Gear Pump 3-17 GPM 5/8″ Keyed Shaft SAE A-2 Bolts CW Cast Iron NEW Displacement – 1.37 Cubic Inches Shaft Type – 5/8″ Straight Keyed Mounting Flange – SAE A-2 Bolts Outlet Port – SAE 10 Inlet Port – SAE 12 MAX Working Pressure – 2300 PSI Peak Pressure – 2900 PSI Direction – Clockwise (Right) 3 – 17 GPM MAX Speed – 3000 RPM MIN Speed – 500 RPM Cast Iron Body and Mounting Flange Weight – 7 LBS 1-year Manufacturer Warranty For more details please check the drawing
If you need any technical assistance, do not hesitate to contact us (844) MAGISTE Free Shipping1-year Warranty Made in EuropeHydraulic Gear Pump 6-29 GPM 7/8″ Keyed Shaft SAE B-2 Bolts CCW Aluminium NEWHydraulic Gear Pump 6-29 GPM 7/8″ Keyed Shaft SAE B-2 Bolts CCW Aluminium NEW Displacement – 2.74 Cubic Inches Shaft Type – 7/8″ Straight Keyed Mounting Flange – SAE B-2 Bolts Outlet Port – SAE 12 Inlet Port – SAE 16 MAX Working Pressure – 2100 PSI Peak Pressure – 2600 PSI Direction – Counter-Clockwise (Left) 6 – 29 GPM GPM @ 2000 RPM – 23.72 MAX Speed – 2500 RPM MIN Speed – 500 RPM Aluminium Body and Mounting Flange Weight – 14 LBS 1-year Manufacturer Warranty For more details please check the drawing PaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. We offer FREE shipping via FedEx Ground on all products! (Some exclusions apply.) Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either a replacement or a full refund. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one. We will refund the amount within 2 business days from receiving the returned item. Restocking fee is 15%. – The customer will be responsible for both outbound shipping and return shipping charges. – The customer may return any unopened (New in Box) merchandise within the specified time for a full refund except a restocking fee of 15%. – Merchandise that has been “Opened” may be returned within the specified time, however the returned items must be in a condition worthy of selling “new” with all original materials and packaging present. Power Equipment Returns are not eligible for returns once it has been in contact with gas or oil. Once gassed or oiled it will not be accepted for return even if sent back. If you have gassed or oiled the machine and are having problems, you will need to take it to an authorized service center. If it is a manufacturer defect it may be covered under warranty through that service dealer. BENT RODS IS NOT A WARRANTY CASE!!!High QualityTariff-FreeFast ShippingSee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Hydraulic Gear Pump 6-29 GPM 7/8″ Keyed Shaft SAE B-2 Bolts CCW Aluminium NEW —Displacement – 2.74 Cubic Inches —Shaft Type – 7/8″ Straight Keyed —Mounting Flange – SAE B-2 Bolts —Outlet Port – SAE 12 —Inlet Port – SAE 16 —MAX Working Pressure – 2100 PSI —Peak Pressure – 2600 PSI —Direction – Counter-Clockwise (Left) —6 – 29 GPM —GPM @ 2000 RPM – 23.72 —MAX Speed – 2500 RPM —MIN Speed – 500 RPM —Aluminium Body and Mounting Flange —Weight – 14 LBS —1-year Manufacturer Warranty —For more details please check the drawing If you need any technical assistance, do not hesitate to contact us (844) MAGISTE Free Shipping1-year Warranty Made in EuropeHydraulic Gear Pump 6-29 GPM 7/8″ Keyed Shaft SAE B-2 Bolts CCW Aluminium NEWHydraulic Gear Pump 6-29 GPM 7/8″ Keyed Shaft SAE B-2 Bolts CCW Aluminium NEW Displacement – 2.74 Cubic Inches Shaft Type – 7/8″ Straight Keyed Mounting Flange – SAE B-2 Bolts Outlet Port – SAE 12 Inlet Port – SAE 16 MAX Working Pressure – 2100 PSI Peak Pressure – 2600 PSI Direction – Counter-Clockwise (Left) 6 – 29 GPM GPM @ 2000 RPM – 23.72 MAX Speed – 2500 RPM MIN Speed – 500 RPM Aluminium Body and Mounting Flange Weight – 14 LBS 1-year Manufacturer Warranty For more details please check the drawing Payment We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. Shipping We offer FREE shipping via FedEx Ground on all products! (Some exclusions apply.) Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either a replacement or a full refund.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one. We will refund the amount within 2 business days from receiving the returned item. Restocking fee is 15%. – The customer will be responsible for both outbound shipping and return shipping charges. – The customer may return any unopened (New in Box) merchandise within the specified time for a full refund except a restocking fee of 15%. – Merchandise that has been “Opened” may be returned within the specified time, however the returned items must be in a condition worthy of selling “new” with all original materials and packaging present. Power Equipment Returns are not eligible for returns once it has been in contact with gas or oil. Once gassed or oiled it will not be accepted for return even if sent back. If you have gassed or oiled the machine and are having problems, you will need to take it to an authorized service center. If it is a manufacturer defect it may be covered under warranty through that service dealer. BENT RODS IS NOT A WARRANTY CASE!!!Tariff-FreeFast ShippingHigh QualitySee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer – Magister Hydraulics. How it's done. Moving Industry Seamlessly. Hydraulic Gear Pump 6-29 GPM 7/8″ Keyed Shaft SAE B-2 Bolts CCW Aluminium NEW Displacement – 2.74 Cubic Inches Shaft Type – 7/8″ Straight Keyed Mounting Flange – SAE B-2 Bolts Outlet Port – SAE 12 Inlet Port – SAE 16 MAX Working Pressure – 2100 PSI Peak Pressure – 2600 PSI Direction – Counter-Clockwise (Left) 6 – 29 GPM GPM @ 2000 RPM – 23.72 MAX Speed – 2500 RPM MIN Speed – 500 RPM Aluminium Body and Mounting Flange Weight – 14 LBS 1-year Manufacturer Warranty For more details please check the drawing
Speed: 540RPM. SAE Inlet & Outlet Ports: Our tractor pump is equipped with a standard SAE 12 outlet port and a SAE 16 on the inlet port. The standard size ensures a perfect fit with no fluid loss. Inlet Port:SAE 16.