•Type: 1A1R Straight Cut-Off Wheel. •Diamond Grit Size: 100 Grit. USA MADE 8″ Sintered Diamond Cut-Off Wheel | 0.028″ Thick | 1″ Arbor | High Concentration | Wet Cutting. • Precision slicing. • Dense Graphite.
This open rim design maximizes fluid and airflow, allowing the blade to rapidly clear slurry and heat out of the cut. With an ultra-thin0.065″ thickness, it ensures faster slicing speeds and minimizes expensive material waste.
Grit Size: 100. Ferrites and Graphite. Diamond Thickness.020″. This wheel is compatible with various precision cutting machines, provided they accept a 3/4″ arbor, including Diamond Depth: 4mm. Concentration: Low Diamond Concentration.
Lapidary/Gemstones: Slicing semi-precious stones and minerals. Grit Size: 60/80 (Fine grit for smooth, chip-free finishes). Premium, continuous rim diamond blade. The fine60/80 diamond grit and ultra-thin.063″ kerf (thickness) allow for incredibly clean, surgical cuts in fragile or expensive materials.
Wheel Type: 1A1 Straight Diamond Cut-Off Wheel. Diamond Grit Size: 320 Grit. Precision slicing. Fine 320 grit specification. Diamond Depth: 5 mm. The320 grit specification provides As the wheel is used, the rim naturally dresses itself and wears down uniformly.
Unlike thin plated blades that wear out quickly, thesintered matrix excels at slicing through Grit: 80/100 (Ideal for efficient slabbing and trimming). Arbor Size: 22mm. Diamond Depth: 5mm (Deep impregnation for extended service life).
Manufactured in theUSA, this wheel is designed for ultra-thin precision slicing and sectioning of hard, non-ferrous materials. Electronics: Slicing silicon wafers, ferrites, and substrates. Grit Size: 100/120.
Grit Size: 100/120. ProudlyMade in the USA, these wheels are engineered for precision and durability in demanding industrial cutting applications. Once the wheel begins its first cut, the oxidation on the diamond rim will quickly wear away, exposing fresh diamond grit.
Type: 1A1R Continuous Rim Cut-Off Wheel. ProudlyMade in the USA, this premium blade features a high diamond concentration and a generous8mm matrix depth for an exceptionally long production life. Industrial lapidary trim saws and high-end tile/masonry saws rated for 10″ blades with a 16mm (or 5/8″) spindle.
Mini 1A8 Diamond Cut Off Wheel designed forprecision cutting of hard and brittle materials where accuracy, stability, and consistency are required. Diamond is present across the full rim width, not just on the edge.