(All Sizes & Qty’s) Grade 10.9 Metric JIS Flange Bolts Zinc Hardened Small HeadM6-1.0 x (Up to 25mm) = Full ThreadM6-1.0 x (30mm and higher) = Partial Thread M8-1.25 x (Up to 35mm) = Full ThreadM8-1.25 x (40mm and higher) = Partial Thread M10-1.25 x (Up to 35mm) = Full ThreadM10-1.25 x (40mm and higher) = Partial Thread
3/8″-16 Hex Bolts Grade 5 Zinc Plated Steel 1/2in 5/8in 1in Up to 9in All Sizes Hex cap screws are partially threaded and provide much tighter tolerance than their fully threaded counterparts. Hex bolts are the most common construction fastener having a hex head that can be secured with a socket or wrench and mated with a nut or another internally threaded item. General Product Information Head Style : Hex Head Drive Size : 9/16″ Thread : 3/8″-16 Material : Steel Finish : Zinc Grade Rating : Grade 5 Length : Select From Drop Down Menu Quantity of Fasteners in Package : Select From Drop Down Menu} Detailed Product Information: Head Height : 15/16″ Thread Diameter : .375″ Threads Per Inch (TPI) : 16 System of Measurement : Inch Thread Type : UNC Thread Style : Coarse Thread Specification Met : ASME : B18.2.1-2012 Key Notes: Hex cap screws are partially threaded and provide much tighter tolerance than their fully threaded counterparts. Hex bolts are the most common construction fastener having a hex head that can be secured with a socket or wrench and mated with a nut or another internally threaded item. Grade 5 is a Medium carbon steel that has been quenched and tempered to improve its strength making it one of the most commonly used grades in the automotive industry. Zinc is relatively economical and offers good corrosion resistance in environments not subject to excessive moisture. A clear or blueish chromate finish is applied on top of the zinc to provide additional protection against oxidation. External hex drives can be turned with an adjustable wrench, combination wrench and 6- or 12-point sockets and offers high torque transfer. Fastenere Brand Hex Bolts meet ASME : B18.2.1-2012 specifications for a product that is strong and reliable. Shipping: All orders placed before 3:30 pm EST Will Ship Same Day Tracking is provided on ALL Orders Priority Mail Shipping service is offered at a discount of only $3.95 UPS Ground UPS Next Day Air is available, Please inquire for pricing Returns : ALL returns are accepted if returned within 60 days. Money Back or exchange guaranteed. NO Restocking Fees. For YOU, we constantly strive to find ways of improving our performance.
Item Description Neodymium Magnets – 1″ x 1/4″ x 1/4″ Bar Magnets – Length: 1″ (25.4mm) – Width: 1/4″ (6.3mm) – Height: 1/4″ (6.3mm) – Strength: N35 – Magnetized through the length of the bar – Zinc-coated for shiny finish and corrosion prevention – Rare earth neodymium magnets – Extremely strong – For commercial and industrial uses Cautions and Warnings:- CHOKING HAZARD: PLEASE KEEP OUT OF REACH OF CHILDREN AND PETS — SEEK IMMEDIATE MEDICAL ATTENTION IF SWALLOWED – These are strong magnets and should be handled with care to avoid personal injury and damage. – Magnets may break or shatter if dropped or allowed to snap against each other. – It is easy to pinch your fingers or other body parts when handling magnets – gloves and other protection are recommended. – Please keep out of reach of children and pets. – Pregnant women should not handle magnets. – Do not handle magnets if you have a pacemaker or other similar device. – Avoid contact between magnets and electronic media such as televisions, computer monitors, cameras. – Avoid contact between magnets and credit cards. – Do not heat magnets above 175°F (80°C) otherwise the magnets will begin to lose their magnetic strength. Shipping: – Orders are processed and shipped Monday-Friday. – Combined shipping discounts are available for multiple item purchases. See the “Shipping and Payments” tab for more details – We only ship to confirmed addresses. If your address is unconfirmed we may require further information and your order could be delayed. Terms of Sale: – All sales to international addresses are considered ‘as is’, with no warranties expressed or implied. We do not accept returns for items shipped to international customers under any circumstances. Please feel free to e-mail with any questions you may have. Thanks and God bless.
HTML Editor – Full Version 1/2″-20 Diameter FINE Thread Grade 5 Finished Hex NutMultiple Quantities and Sizes Available from this Listing! Finish: Zinc Plated Looking for additional items or different quantities? Click the button below to visit our full eBay store. Questions? Reach us by eBay Messaging… We’ll be glad to help! Payment Policy Only PayPal is accepted for payment. Immediate Payment required after purchase. If you ordered an item by mistake, please let us know as soon as possible so we can cancel it prior to shipment. An Unpaid Item Case will be opened if payment has not been received within 7 days of the purchase date. Shipping Policy Shipping within the 50 United States only. We do not ship Internationally. Most orders ship via USPS Priority Mail. Some orders may ship via UPS Ground due to size and weight restrictions. All shipping methods are at our discretion. Tracking information will be made available after your products have shipped. Although most orders ship within 1 business day, please allow up to 3 business days for shipping. Business days do not include weekends or holidays. Expedited / Next day shipping is available upon request. Buyer will be responsible for additional costs. Returns Policy You may return any item for any reason within 14 days to receive a full refund. Please contact us before returning your product. Your refund will not be applied without prior notification. Buyer is responsible for return freight. FEEDBACK FEEDBACK IS VERY IMPORTANT TO US! If you are satisfied with your purchase, please leave us a 5-Star feedback rating. If you are NOT satisfied with our products or services, please contact us before leaving feedback. We will do our best to make it right. About Us Our fasteners are quality inspected and manufactured to all applicable standards and specifications. These are not second quality fasteners that were previously rejected or rescued from a scrap yard. If you have any questions, please feel free to contact us. We can help!CLICK HERE to visit the Assortments section of our eBay Store
HTML Editor – Full Version 1/2″-13 Diameter Grade 5 Coarse Thread Hex Head Cap ScrewsProtective zinc clear finish to help prevent rust!Multiple Quantities and Sizes Available from this Listing! Finish: Zinc Clear Wrench Size: 3/4″ Looking for additional items or different quantities? Click the button below to visit our full eBay store. Questions? Reach us by eBay Messaging… We’ll be glad to help! Payment Policy Only PayPal is accepted for payment. Immediate Payment required after purchase. If you ordered an item by mistake, please let us know as soon as possible so we can cancel it prior to shipment. An Unpaid Item Case will be opened if payment has not been received within 7 days of the purchase date. Shipping Policy Shipping within the 50 United States only. We do not ship Internationally. Most orders ship via USPS Priority Mail. Some orders may ship via UPS Ground due to size and weight restrictions. All shipping methods are at our discretion. Tracking information will be made available after your products have shipped. Although most orders ship within 1 business day, please allow up to 3 business days for shipping. Business days do not include weekends or holidays. Expedited / Next day shipping is available upon request. Buyer will be responsible for additional costs. Returns Policy You may return any item for any reason within 14 days to receive a full refund. Please contact us before returning your product. Your refund will not be applied without prior notification. Buyer is responsible for return freight. FEEDBACK FEEDBACK IS VERY IMPORTANT TO US! If you are satisfied with your purchase, please leave us a 5-Star feedback rating. If you are NOT satisfied with our products or services, please contact us before leaving feedback. We will do our best to make it right. About Us Our fasteners are quality inspected and manufactured to all applicable standards and specifications. These are not second quality fasteners that were previously rejected or rescued from a scrap yard. If you have any questions, please feel free to contact us. We can help!CLICK HERE to visit the Assortments section of our eBay Store
PLEASE READ ALLPhillips Modified Truss Head #8 x 1/2″, 3/4″, 1″, 1-1/4″,1-5/8″,2″, 2-1/2″ and 3″ K-Lath Self piercing / Tapping Screws zinc plated (see Item # 254460087229 for black oxide coated) , [ we do not carry these in #6 or #10] ***** Some bulk quantity will only ship to mailand USA ONLY if outside then contact first befor placing the order*****SOME PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product / Item dimensions, finish, head markings, coating, thread length, stamping shape or forging shape, drive head depth, etc., may differ from picture. Products are guaranteed to meet the specs to which they are manufactured (Industry standards). Specs allow for tolerances in dimension and shape, which can vary from lot to lot (varies from one manufacturer to another). *****And will NOT match what you have*****.(this not make it defective) If you have any questions, or if your requirements include specific dimensions, please contact us before buying. Specifications for this item Brand Name CYW, Interfast, Strong-point and other brands System of Measurement Inch Drive Style Phillips Exterior Finish Zinc-Plated Head Style Truss Head Number of Screws Select above Point Style Self-piercing / Tapping Multipurpose sheet metal screw for light to medium gauge applications Also used to attach lath to wood or light gauge metal. Just to let you know that if you have a resale number you can give it eBays that way you will not pay any sales tax on any of your purchases. *** Shipping Times are ESTIMATED and NOT guaranteed ***This is from bulk pack the packages above are not individually packed packs actual color may vary from pictures.Please allow + or – 5% Approximately count difference depending on the size due to the fact its counted by machine or by weight. Product / Item dimensions, finish, head markings, coating, thread length, stamping shape or forging shape, drive head depth, etc., may differ from picture. Products are guaranteed to meet the specs to which they are manufactured (Industry standards). Specs allow for tolerances in dimension and shape, which can vary from lot to lot (varies from one manufacturer to another). *****And will NOT match what you have***** (this does not make it defective) If you have any questions or if your requirements include specific dimensions, please contact us before buying.Picture shown above is example and each length have different amount of threads are on the shaft thread are decreases as length increases. These are industry standard screws. Contact us if you have any questions.SOME PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.If you have any questions, please ask before purchase.We reserve the right to alternate between FedEx, UPS or USPS depending on which is cheaper and/or faster.Please take a moment and check our other listings too.Offers will be considered on quantity purchasesNote: The digital images we display have the most accurate color possible. However, due to differences in computer monitors, there may be variations in color between the actual product and your screen.FeedbackTo leave feedback for your purchase on eBay, please follow these steps:1. Go to My eBay>Account>Feedback.2. Choose the item you purchased from your list of items awaiting feedback.3. Submit your feedback. We thank you in advance for taking the time to submit your feedback.Please take a moment and view our new listing daily, hope to see you make more purchases soon.Best wishes & thank you for your business. ReturnsFailures to follow manufacturer’s instructions to assemble, install, operate, or download proper software etc. are no grounds for return as defect.***** In case of any of the bellow listed matters Please contact us first and do not open a case or return and we will take care the matter immediately********** If package received is damaged the DO NOT open the package NOTIFY us immediately provide us with the pictures (if you open the package then you the buyer will have to pay for the return shipping cost otherwise it can be sent back as return to sender or wait for the insurance carriers instruction to send it to them but do not send it back before you get the authorization from us otherwise the shipping cost + partial fees WILL be deducted from refund amount you give consent to agree with this term if you do not agree then do NOT make the purchase with us we get about 0-3 of these a year and most of our packages are insured ********** If you receive a wrong item DO NOT open the inner packing and do NOT discard any packing, Please NOTIFY us immediately and provide us with the pictures ASAP so we can handle the matter immediately*********ALL RETURNS MUST BE IN ORIGINAL SHIPPING PACKING ALTERNATE PACKING WILL INCREASE SHIPPING COST WHICH WILL BE PAID BY BUYER ***** (Example: if you receive item in a flat rate shipping it must be returned in exactly same envelope if you change to plain or larger envelope or box it will cost a lot more in shipping which will be paid by buyer and post office will charge extra which we will not pay and package will be returned to sender and you the buyer will lose the label and will have to pay again in order to send the item back and this will cause a lot of delays). Damaged, Wrong or defective item/s received must be reported within 7 days of purchase or 3 days of delivery. Buyer must return the item in its original packing and original shipping supplies (shipping bags or boxes the item was shipped in, disposing them the will not be eligible for retain or refund. return will be accepted only when a proof is provided by the buyer as requested by the seller such as pictures etc. and dispose the item if and as instructed by the seller and provide the proof of doing so as requested by the seller.Buyer must keep all the packing and damages item for insurance claim as the item will be shipped back to insurance company and not us.Any item returned without original packing or partial shipping packing, refused delivery (marked return to sender) delivered to incorrect address provided by the buyer, abused, mishandled by the buyer or claimed as defective but in fact the item is in working condition will incur handling fee 30% and $1.00 minimum for items $4.00 and under PLUS shipping cost both ways outbound and inbound, these fees will be deducted from the total purchase price, Abused, used, mishandled, missing original packing, unsealed factory sealed item are NON REFUNDABLE. All returns must be in the same condition you received it and in the original packaging and return postage is the responsibility of the buyer. Any item returned to us for any reason other than the sellers fault will be subject 30% handling fee minimum of $3.00 plus all the shipping charges both way outbound and inbound in case of any refund is given.WarrantyWe do NOT provide any warranty what so ever, you can purchase the warranty thru eBay Square trade at the time of purchase. International buyerBuyer is responsible for paying any import tax, duties and customs charged by your destination and releasing the item from the customs, post office etc.Item/s no picked up by the buyer from the customs will be considered delivered and not eligible for returns or refund.Buyer is responsible for returned item undelivered to given address, failed delivery attempts, unpaid customs, and unclaimed item from your local delivery agency etc. or returned for any reason other than seller fault.Seller will not ship to any destination where delivery confirmation is not available but the buyer has the option and can insist on shipping by assuming and accepting the entire risk o in the event that the package it damaged or lost or returned undelivered. NO REFUND or any compensation will be given or reimbursed by the seller to the buyerAny lost or damaged item is responsibility of the buyer they can purchase the insurance before paying for the shipping.Any item returned to us for any reason other than the sellers fault will be subject 30% Handling fee minimum of $3.00 plus all the shipping charges both way outbound and inbound in case of any refund is given.Shipping charges are NON_REFUNDABLE under any circumstances (shipping cost is NOT covered by insurance, only the item face value is) Fasteners etc.Amount of threads on the shaft change accordingly with lengthPlease check first if the fastener you are about to purchase is suitable or compatible to what you are using it for.Not using proper bit or failure to drill a proper thickness and depth pilot holes WILL BREAK the screw or make it strip that does not mean the screws are defective and will not be eligible for returns as a defective. All the coating application is applied by the manufactures and NOT us.Please note that the seller does NOT provide any guaranty or warranty on the performance of the fasteners / nails / staples / brads etc. improper use or application of these items may cause serious injury or damage to the item itself.Fasteners #6 and below are designed for very light application and specific use as described by the manufacturer and misuse, over tightening, wrong application or use of impact drivers over torque etc. will cause the heads to break and cannot be returned or exchanged. This also applies to all the other #’s when over torqued or wrong applications.Some of these fasteners are intended for very light applications, please contact or visit the manufacturer’s web site for more information.***Improper use / application / or use of impact drivers on certain size and type of fasteners may cause the heads to break off you might need to drill pilot holes the screws might even break despite pilot holes depending on the screw, type of wood and/ or the toque used to drive the screw etc. Bits longer than 2” and torque bits will cause problems such as heads breaking off, slipping, stripping, cavatate etc.( Bits longer than 2“ have greater chance to break the screws)We recommend that if you are concerned with the coating or the strength of the screw is to purchase small quantity and try it first before making a large order to see if the fastener you are about to purchase is suitable for your application. Thank you!
Brand new from bulk pack Flat Head Phillips #6 x 1/2″, #6 x 5/8″or #6 x 3/4″ Wood particle board MDF, Hinge and even plastic composites Screws Zinc PlatedSOME PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM ***** Tint / shade may vary from one manufacture to another******** large size large quantities might not be eligible to ship ouside mainland USA*** The professional woodworkers choice – our thread design provides maximum holding power in a variety of different woods and man-made materials. Excellent holding power in particleboard, MDF and even plastic composites. We have added an Extra- Deep Phillips Recess to help minimize bit slippage; making this one of our most popular fasteners for the furniture and cabinet industry. Size: #6 X 1/2″, #6 x 5/8″ or #6 x 3/4″Flat head for counter sinking – Material: Zinc Hardened – Excellent holding power in particleboard, MDF and even plastic composites – Extra-deep Phillips Recess to help minimize bit slippage – One of our most popular fasteners for the furniture and cabinet industry This is from bulk pack the packages above are not individually packed packs actual color may vary from pictures.Just to let you know that if you have a resale number you can give it eBays that way you will not pay any sales tax on any of your purchases.*** Shipping Times are ESTIMATED and NOT guaranteed ***Please allow + or – 5% Approximately count difference depending on the size due to the fact its counted by machine or by weight. If you have any questions, please ask before purchase.We reserve the right to alternate between FedEx, UPS or USPS depending on which is cheaper and/or faster.Please take a moment and check our other listings too.Offers will be considered on quantity purchasesNote: The digital images we display have the most accurate color possible. However, due to differences in computer monitors, there may be variations in color between the actual product and your screen.FeedbackTo leave feedback for your purchase on eBay, please follow these steps:1. Go to My eBay>Account>Feedback.2. Choose the item you purchased from your list of items awaiting feedback.3. Submit your feedback. We thank you in advance for taking the time to submit your feedback.Please take a moment and view our new listing daily, hope to see you make more purchases soon.Best wishes & thank you for your business.Returns***** If receive a wrong item DO NOT open the inner packing and do NOT discard any packing, Please NOTIFY us immediately and provide us with the pictures ASAP so we can handle the matter immediately*********ALL RETURNS MUST BE IN ORIGINAL SHIPPING PACKING ALTERNATE PACKING WILL INCREASE SHIPPING COST WHICH WILL BE PAID BY BUYER ***** (Example: if you receive item in a flat rate shipping it must be returned in exactly same envelope if you change to plain or larger envelope or box it will cost a lot more in shipping which will be paid by buyer and post office will charge extra which we will not pay and package will be returned to sender and you the buyer will lose the label and will have to pay again in order to send the item back and this will cause a lot of delays). All returns must be in the same condition you received it and in the original packaging and return postage is the responsibility of the buyer.Any item returned to us for any reason other than the sellers fault will be subject 30% handling fee minimum of $3.00 plus all the shipping charges both way outbound and inbound in case of any refund is given.International buyerBuyer is responsible for paying any import tax, duties and customs charged by your destination and releasing the item from the customs, post office etc.Item/s no picked up by the buyer from the customs will be considered delivered and not eligible for returns or refund.Buyer is responsible for returned item undelivered to given address, failed delivery attempts, unpaid customs, and unclaimed item from your local delivery agency etc. or returned for any reason other than seller fault.Seller will not ship to any destination where delivery confirmation is not available but the buyer has the option and can insist on shipping by assuming and accepting the entire risk o in the event that the package it damaged or lost or returned undelivered. NO REFUND or any compensation will be given or reimbursed by the seller to the buyerAny lost or damaged item is responsibility of the buyer they can purchase the insurance before paying for the shipping.Any item returned to us for any reason other than the sellers fault will be subject 30% Handling fee minimum of $3.00 plus all the shipping charges both way outbound and inbound in case of any refund is given.Shipping charges are NON_REFUNDABLE under any circumstances (shipping cost is NOT covered by insurance, only the item face value is) Thank you!
24 New N52 grade neodymium block magnet! A Neodymium Rare Earth Magnet that is never handled, will never break but one that is not handled correctly will always break. Very large 3″ x 1 1/4″ x 1″ Rare Earth magnet.
As a general rule, the larger the magnet, the more susceptible they are to become damage. This is because they typically have higher pull force values and greater mass, which causes them to contact surfaces at a faster rate of speed and with greater force. Understand that smaller Neodymium Rare Earth Magnets also have the potential to become damaged from hard impacts. It is extremely important that each buyer understands how to properly handle this type of magnetic material before purchasing in order to prevent damage to the product. Any damage to the material after it is received and handled will not be covered under our 30-day return policy. This includes damage sustained to the item while trying to separate the material after receipt. If you suspect the item has been damaged in transit, it is important that you contact us prior to opening the package. Damage reported to us after the item has been opened will be deemed mishandling of the product by the buyer and is not eligible for a return, refund or exchange. All Pull Force ratings provided within each listing for our magnetic materials is based solely on calculations derived from various factors such as magnet dimensions, grade, plating type, surface conditions, etc.. The values provided are approximations and each individual magnet could potentially vary slightly from the estimate. We do however make every effort to provide the most accurate information to our customers. All buyers should understand that Pull Force values are determined based on applying the entire magnetic material face to a one Inch thick steel plate having perfect surface conditions. Using a magnet on material with poor surface conditions, applying the magnet to a ferrous surface having less than a one inch thickness or partial magnetic face contact will result is lower Pull Force values than what is stated in the listing. Additionally, all magnetic material will need to have direct contact to the ferrous surface in order to exert the total Pull Force capacity. We would also like to inform all potential buyers that Pull Force is not the same thing as Lift Capacity. For the most part, all Neodymium Rare Earth Magnets are rated in Pull Force. That value however does not directly translate to a magnets’ physical lifting capacity. There are currently no conversion tables available that provide this information. However in our experience, we have found this value to be around 30% of the rated Pull Force value. Meaning, a magnet with a Pull Force rating of 30lbs can approximately lift a 10lb object, assuming perfect conditions are present that maximize the magnetic material properties. Again, these values and estimates are not guarantees. All buyers should perform their own testing to validate all functionality regarding each specific application and end use before implementation of the material. Our intent here is only to provide general reference for customers unfamiliar with magnetic materials. Please also keep in mind that air gaps between the magnet face and ferrous material will greatly reduce Pull Force and Lift Capacity values. Air gaps include physical air as well as any other non-ferrous material. As an estimate, buyers can expect a loss of Pull Force and Lift Capacity at a rate of 50% per .125″ inch gap present between the magnet and ferrous material. Meaning, a magnet that has been proven capable to lift an object weighing 4lbs will only be able to lift an object weighing 2lbs when a single .125″ inch piece of wood is between the magnet and ferrous material being lifting. Again, we do not guarantee these values and they are being provided solely as a basis for understanding of how magnetic material functions. Shipping: All orders are shipped within one business day from the date of cleared payment but we make every effort to exceed that expectation. Please understand that from time to time the shipping carrier can incorrectly route or misplace a package. While this is a rare occurrence and absolutely out of our control, have confidence in buying from us that you will receive a full refund for the item plus shipping costs in the event your order is not delivered. For these few cases, we ask that you file an eBay case for the purchase as “Item not received” so that we can process the refund for you. If you would still like to have the item, make another purchase as you did previously and your new order will be shipped out as soon as possible. Please understand that we are not able to outright send another shipment as a replacement for a lost package due to inventory control reasons. In order to receive another shipment, a new purchase of the same item will be required once a refund has been provided for the original order. All orders will have tracking numbers available to you for reference. This information is uploaded automatically to your purchase history once we have started processing your order for shipment. Returns and Refunds: Should you decide that you have mistakenly made a purchase and wish to cancel an order, we are happy to assist you with that process. We only ask that you please send us a cancellation request prior to the tracking number being available for the order. Once an order has a tracking number posted, we are no longer be able to complete the cancellation request and the item will be shipped to your location. We do offer a 30-day return policy for each of the items that we sell as long as the package has not been opened. Should you decide that you wish to return the item, please ensure that adequate shipping methods are used to protect the package from becoming stuck in transit. Refunds will only be provided once the material is received at our facility and inspected for damage. All returned items are subject to a 20% restocking fee and buyers are responsible for paying return shipping expenses. Additionally, the shipping costs for the original purchase transaction will not be refunded for any returned items. Once the returned material has been received at our facility, we will provide a refund for the actual item cost only, minus the 20% restocking fee. Any damage reported or sustained to the item after the material has been handled is not eligible for returns, refunds or exchanges. Customer Satisfaction: We look forward to hearing from you regarding your purchase and very much appreciate your business! Should there be an issue with your transaction, delivery or product we ask that you please contact us prior to leaving seller comments so that we can work to find a solution. We make every effort to have all of our customers satisfied with their purchase. Leaving poor performance comments without contacting us first, does not benefit anyone.
We are USA seller, Ship From USA! FREE SHIPPING FROM CALIFORNIA !!! Wholesale Super Block Magnets 1inch x 1inch x1/8inch Rare Earth Neodymium N50 Description: In order to better display the products, the image has been amplified. Please check its dimension before your purchase. Super Strong Rare Earth Magnet – once they get stuck with each other, they are hard to break apart; Easy fragile ,so please use it carefully. Can also be used to extend protected lithium batteries with recessed contact points. Electrically conductive (making them suitable to extend recessed batteries). Perfect for sticking notes on fridge doors. Ideal for DIY projects, whiteboard fixing, adsorption of various steel parts, fixing tissue box on the roof, etc Color: New As Picture Size: 1″x1″ x1/8″ inch Grade: N50 Supper strong magnets, please take care! Contact us if you want to wholesale this, thank you! Supper strong magnets, please take care! Shipping: NOT AVAILABLE FOR INTERNATIONAL CUSTOMERSYour order will arrive based on the shipping service selected at checkout. All items are shipped from California.Checkout instructions:Click the Pay Now button at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning a listed item.If immediate payment is required, you will be notified upon selecting BUY IT NOW.If immediate payment is not required, you can continue shopping and add other items to your selections. A combine invoice will be sent and via email and you will be able to check out for all items as one time.Customer Service:We are dedicated to making your buying experience as smooth and satisfactory as possible. All communication is done through EBAY MESSAGES. We respond within 24 hours of your request for information. We are closed on weekends and holidays. Return Policy: If you are not satisfied with our product, you may return any item within 14 days after the date of receipt. Compared to the return policies of most other crate sellers who don’t refund your original shipping and handling, we will refund you the full payment (price and original shipping and handling). You are responsible for paying the return shipping costs.